Abstract:Three types of new-structured phosphorized tin microspheres (Sn–P), phosphorized tin microsphere-carbon (Sn–P–C), and phosphorized tin nanoparticles embedded in interconnected porous carbon microspheres (Sn–P@PCMs) were prepared through a carbothermal reduction-assisted phosphorization strategy. The characterization of the formation mechanism and microstructure of Sn–P, Sn–P–C, and Sn–P@PCMs composites demonstrated that the controllable evaporation of coordinated phosphorus in the thermally unstable tin phosphide intermediate by accurate thermal treatment contributed to the formation of a ca. 3 wt % P-doped metallic tin structure featuring a nonstoichiometric Sn x P y (y/x = 0.2) core, a Sn-rich phosphorized metallic (y/x = 0.05) shell, and an increased phosphorus concentration from the outer surface to the inner core. The as-prepared phosphorized tin-based composites were applied as counter electrode materials for dye-sensitized solar cells (DSSCs), in which the Sn–P–C counter electrode exhibited the lowest charge transfer resistance of 3.47 Ω and the assembled DSSCs delivered an optimum power conversion efficiency of 8.59%, superior to those of Pt-based cells (6.78 Ω and 7.46%, respectively). The unique bifunctional structure of the Sn x P y conductive core coupled with the phosphorized metallic Snδ+ (0 < σ < 0.6) electrocatalytic shell accounts for its excellent electrocatalytic activity and electrical conductivity. In addition, the phosphorized tin-based composites were utilized as potential anodic material for lithium-ion batteries, in which the Sn–P@PCMs electrode showed a specific capacity of 743 mAh g–1 at 0.1C after 400 cycles and 435 mAh g–1 at 5C after 30 cycles. The superior Li-ion storage, cyclability, and rate performance of Sn–P@PCMs could be attributed to the incorporation of Sn–P nanoparticles into interconnected porous carbon microspheres that effectively buffered the large volumetric change and enhanced the electronic–ionic conductivity during the lithiation and delithiation process.

A New Electrochemical Reaction Mechanism of Tin Pyrophosphate Thin Film with Lithium

JES FOCUS ISSUE ON MECHANO-ELECTRO-CHEMICAL COUPLING IN ENERGY RELATED MATERIALS AND DEVICES Structural Evolution and Pulverization of Tin Nanoparticles during Lithiation-Delithiation Cycling

A high-performance tin phosphide/carbon composite anode for lithium-ion batteries

Structural Evolution and Pulverization of Tin Nanoparticles during Lithiation-Delithiation Cycling

Tin‐Based Composite Oxide Thin‐Film Electrodes Prepared by Pulsed Laser Deposition

Pulsed-Laser-Deposited Sn4p3 Electrodes For Lithium-Ion Batteries

Non-aqueous Electrodeposition of Porous Tin-Based Film As an Anode for Lithium-Ion Battery

Pulsed-Laser-Deposited Sn[sub 4]P[sub 3] Electrodes for Lithium-Ion Batteries

Electrochemical Performance of Amorphous and Crystalline Sn2p2o7 Anodes in Secondary Lithium Batteries

Preparation and electrochemical lithiation of tin-based materials

The Reinvestigation on Electrochemical Reaction Mechanism of Stannic Oxide Thin Film with Lithium

Facile Fabrication of Binder-free Metallic Tin Nanoparticle/Carbon Nanofiber Hybrid Electrodes for Lithium-ion Batteries

PPy‐encapsulated SnS2 Nanosheets Stabilized by Defects on a TiO2 Support As a Durable Anode Material for Lithium‐Ion Batteries

Fabrication of three-dimensional nanoporous Cu-supported tin electrode and its lithium storage performance

Reconstructing 2D metallic Sn4P3 with high-conductive interlayer towards high-rate lithium storage

Electrochemical Reactions of Lithium with Transition Metal Stannides

Reversible formation of metastable Sn-rich solid solution in SnO2-based anode for high-performance lithium storage

Progressive lithiation mechanism of Sn4P3 nanosheets as anodes for Li-ion batteries

A novel method to synthesize SnP 2 O 7 spherical particles for lithium-ion battery anode

Confining Ultrafine Tin Monophosphide in Ti3C2Tx Interlayers for Rapid and Stable Sodium Ion Storage

Controlled Synthesis of Highly Active Nonstoichiometric Tin Phosphide/Carbon Composites for Electrocatalysis and Electrochemical Energy Storage Applications