Abstract:The liquid oxygen/methane staged cycle liquid-rocket engine is one of the most potential rocket engines in the future for its higher performance, higher fuel density and reusable capacity. Two working states of this liquid-rocket engine named as full-load state and half-load state are defined in this paper. Based on this liquid-rocket engine, a dual-rocket-based-combined-cycle propulsion system with liquid oxygen /air/methane as propellants is therefore proposed. The dual-rocket-based-combined-cycle system has then five working modes: the hybrid mode, pure ejector mode, ramjet mode, scramjet mode and pure rocket mode. In hybrid mode, the booster and ejector rockets driven by the full-load liquid-rocket engine work together with the purpose of reducing thrust demand on ejector rocket. In scramjet mode, the fuel-rich burned hot gas generated by the half-load liquid-rocket engine is used as fuel, which is helpful to reduce the technical difficulty of scramjet in hypersonic speed. The five working modes of dual-rocket-based-combined-cycle are highly integrated based on the full- or half-load state of the liquid oxygen/methane staged cycle liquid-rocket engine, and the unified single type fuel of liquid methane is adopted for the whole modes. Then a preliminary design of a horizontal takeoff two-stage-to-orbit launch vehicle is conducted based on the dual-rocket-based-combined-cycle propulsion system. Under an averaged baseline thrust and specific impulse, the launch trajectory to reach a low Earth orbit at 100km is optimized via the pseudo-spectral method subject to maximizing the payload mass. It is shown that the two-stage-to-orbit vehicle based on the dual-rocket-based-combined-cycle can achieve the payload mass fraction of 0.0469 and 0.0576 for polar mission and equatorial mission, respectively. Conclusively, insights gained in this paper can be usefully applied to a more detailed design of the dual-rocket-based-combined-cycle powered two-stage-to-orbit launch vehicle.

Analysis of the first stage trajectory for atsto space transportation concept powered by rbcc engine

RBCC Constant Dynamic Pressure Booster Trajectory Design and Propellant Mass Flowrate Analysis for TSTO Transportation System

A Survey on the Conceptual Design of Hypersonic Aircraft Powered by RBCC Engine

Investigation on the performance and feasibility of RBCC-based access-to-space via multi-objective design optimization

System Analysis of a Hydrocarbon-Fueled RBCC Engine Applied to a TSTO Launch Vehicle

Multidisciplinary Design Optimization of Reentry-Powered Hypersonic Vehicles Based on Surrogate Model

Some Aspects on Hydrocarbon-fueled RBCC Engines for a TSTO Launch Vehicle

Flight trajectory optimization study of a variable-cycle turbine-based combined cycle engine hypersonic vehicle based on airframe/engine integration

Rapid ascent trajectory optimization of rocket-based combined cycle hypersonic vehicle

Conceptual Study of a Dual-Rocket-based-combined-cycle Powered Two-Stage-to-orbit Launch Vehicle

Trajectory Optimization for a TBCC-powered Supersonic Vehicle with Transition Thrust Pinch

A Trajectory Design Method Via Target Practice for Air-Breathing Hypersonic Vehicle

An S-type Ascent Trajectory Control Method Based on Scramjet Engine Working Boundary of RBCC

Trajectory reconstruction algorithm for powered landing of reusable rocket

Unsteady interaction and dynamic stability analysis of a two-stage-to-orbit vehicle during transverse stage separation

Thrust-matching and optimization design of turbine-based combined cycle engine with trajectory optimization

Parametric analysis of thermal cycle of a short take-off and vertical landing engine

Thrust Vector Control for Powered Flight of the Upper Stages

Feasibility and Performance Analysis of High-Energy-Density Hydrocarbon-Fueled Turboexpander Engine

Rapid Three-Dimensional Constrained Trajectory Generation for Near Space Hypersonic Vehicles

Preliminary Design for Air Breathing Reusable Launch Vehicle