Abstract:The pre-peak microstructure evolution of the material is crucial in determining the strength and failure scheme of the material, but is not captured by the existing shear strength parameters models which focus on post-peak stage information. Novel concepts of pseudo-cohesion and pseudo-internal friction angle that account for both the pre-peak and post-peak stage information were proposed in this study, based on the experimentally observed response of the rock mechanics parameters to an external load (the maximum principal stress). These two parameters were analytically derived as functions of maximum principal strain, with coefficients to be determined (i.e., by applying the Mohr–Coulomb criterion with these parameters to experimental data). The dependence of pseudo-cohesion and pseudo-internal friction angle on the axial strain and confining pressure was investigated. The evolution of the strength parameters was found to relate to the propagation of micro-crack developed in the loading process, as revealed by PFC 2D simulations reproducing experiments. The results show that (1) analytical model characterizing the pseudo-cohesion and internal friction angle as the quadratic function of axial strain accurately reflects the mechanical response characteristics of the specimen; (2) before the residual stage, the pseudo-cohesion first increases and then decreases with increasing strain, while the pseudo-internal friction angle increases continuously; (3) for the sandstone specimens studied, the pseudo-cohesion at the peak stress increases by a gradually decreasing rate with increasing confining pressure, while the pseudo-internal friction angle at the peak stress decreases by a decreasing rate with the increasing confining pressure; (4) CPM well characterized the mechanical properties of rock under multiple confining pressures, as the total stress–strain curves and failure modes of numerical specimens reproduced the experimental results. The evolution of rock pseudo-shear strength parameters is closely related to the external load and the generation, propagation, and penetration process of rock cracks. The rock pseudo-shear strength parameters are gradually mobilized with the increasing load, and the propagating of cracks owing to the decrease of mobilizable maximum cohesion and the increase of mobilizable maximum internal friction angle.

Analysis Of Relationship Between Particle Mesoscopic And Macroscopic Mechanical Parameters Of Cohesive Materials

Numerical study on mechanical properties of grains in rock discontinuity undergoing shear

Influence of the rock meso-characteristics on macro mechanical behavior

Meso-mechanical si mulation study on triaxial test of coarse-grained soil based on DEM

Study On The Relationship Between Particle Micro Parameters And Soil Mechanical Properties

Cohesive Mohr–Coulomb interface effects on the strength criterion of materials with granular-based microstructure

Relationship of rock microscopic parameters with the elastic modulus and strength

Sensitivity Analysis of Macroscopic Mechanical Behavior to Microscopic Parameters Based on PFC Simulation

Influence of Mesoscopic Parameters of Weakly Cemented Rocks on Macroscopic Mechanical Properties

Discrete Element Simulation of Macro and Micro Mechanical Properties of Round Gravel Material under Triaxial Stress

RELATION BETWEEN MESO-PARAMETERS OF PARTICLE FLOW CODE AND FRACTURE TOUGHNESS OF ROCK

DEM Simulation of Micro-Macro Mechanical Behaviour of Granular Materials

A Study of Three Intrinsic Problems of the Classic Discrete Element Method Using Flat-Joint Model

Micromechanism study on the influence of particle deposition angle on mechanical properties of sand

A Research on the Macroscopic and Mesoscopic Parameters of Concrete Based on an Experimental Design Method

Correlation of microscopic and macroscopic elastic constants of granular materials based on linear contact model

Macro- and Micro-Mechanical Relationship of the Anisotropic Behaviour of a Bonded Ellipsoidal Particle Assembly in the Elastic Stage

Study on the Relevance of Macro-micro Parameters for Clays

Approach for determining micro-strength parameters of rock based on particle flow code

A novel obtaining method and mesoscopic mechanism of pseudo-shear strength parameter evolution of sandstone

Shear mechanical properties of the interface between soil-rock mixture and rough structural plane