Abstract:This work focused on the removal of Pb(II) from aqueous solution using kaolin and bentonite clays modified with hexadecyl trimethyl ammonium bromide (HDTMA). The clays were characterized using a zetasizer, scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), Brunauer-Emmet-Teller (BET), Fourier-transform infrared (FTIR) spectroscopy and thermal gravimetric analysis (TGA). Factors that influence the adsorption of Pb(II) from aqueous solution, namely pH, contact time, adsorbent mass, ionic strength, temperature and initial Pb(II) concentration were investigated. The results show that HDTMA was successfully incorporated into the kaolin and bentonite clay structures. The most favorable parameters for the adsorption of Pb(II) ions onto all adsorbents was pH of 6.0, temperature of 25 °C and adsorbent mass of 200 mg. Adsorption isotherms and kinetic studies showed that the adsorption of Pb(II) onto kaolin, bentonite and organobentonite clays followed the Langmuir isotherm and pseudo-first order kinetic model, while the adsorption onto organobentonite was better explained by the Freundlich isotherm and pseudo-second order kinetic model. Maximum monolayer adsorption capacity of organobentonite, calculated from the Langmuir model was 18.75 mg/g, which is higher than that obtained for the unmodified bentonite (14.71 mg/g); while for organokaolin it was 2.26 mg/g, which is less than that of the unmodified kaolin (4.19 mg/g). Thermodynamic studies showed that the reactions were exothermic and unfavoured at high temperatures. The adsorbents also showed good removal efficiency for up to four regeneration cycles.

Sorption characteristics of Pb(II) on alkaline Ca-bentonite

Adsorption of Pb (II) from Aqueous Solution by Modified Bentonite

Impact of environmental conditions on the sorption behavior of Pb(II) in Na-bentonite suspensions.

Adsorption Characteristics of Bentonite to Pb~(2+),Zn~(2+),Cr(VI),Cd~(2+)

Adsorption and Desorption Behaviour of Pb(II) on a Natural Kaolin: Equilibrium, Kinetic and Thermodynamic Studies

Pb(Ii) Biosorption by Compound Bioflocculant: Performance and Mechanism

Adsorption characteristics of bentonite to Pb2+, Zn2+, Cr(VI), Cd2+

Removal of Pb(II) ions from aqueous solutions using natural and HDTMA-modified bentonite and kaolin clays

Study of Adsorption and Desorption of Behaviors of Pb2+ on Thiol-Modified Bentonite by Flame Atomic Absorption Spectrometry

Comparative study of Pb(II) sorption on XC-72 carbon and multi-walled carbon nanotubes from aqueous solutions

Impact of environmental conditions on the sorption behavior of Pb(II) onto attapulgite

Carboxymethylcellulose-chitosan film modified magnetic alkaline Ca-bentonite for the efficient removal of Pb(II) and Cd(II) from aqueous solution

Efficient adsorption of Pb(II) by sodium dodecyl benzene sulfonate intercalated calcium aluminum hydrotalcites: kinetic, isotherm, and mechanisms

Adsorption of Pb(II) from aqueous solution by a poly-elemental mesoporous adsorbent

Adsorptive Removal of Pb(II) by Magnetic Activated Carbon Incorporated with Amino Groups from Aqueous Solutions

Sorption Behavior and Mechanism of Pb(II) on Chinese Loess

Sorption of Pb(II) on Na-rectorite: Effects of Ph, Ionic Strength, Temperature, Soil Humic Acid and Fulvic Acid

Removal of Pb(II) from Aqueous Solution by Cross-linked Starch Phosphate Carbamate

Adsorption of Pb(II) on Palygorskite from Aqueous Solution: Effects of Ph, Ionic Strength and Temperature

Biosorption Behaviors of Biosorbents Based on Microorganisms Immobilized by Ca-Alginate for Removing Lead (ii) from Aqueous Solution

Using a novel adsorbent macrocyclic compound cucurbit[8]uril for Pb2+ removal from aqueous solution