Abstract:Skilled human welders can control the weld joint penetration through observing the molten pool. This suggests that a model may be developed to predict the backside bead width, that quantitively measures the weld joint penetration, from the weld pool surface. However, the weld pool surface is specular and subject to the radiation of the arc such that its measurement is challenging. At the University of Kentucky, the weld pool surface is measured using an innovative a 3-D vision sensor that can overcome the challenges caused by the specular nature and arc radiation; and the measured surface is characterized by three parameters. Because of the lack of physics based model, neural networks would typically be used to approximate the unknown correction, which is nonlinear in general, between the backside bead width and the characteristics parameters. Unfortunately, neural networks require large amount of data to train for adequate model accuracy. While the weld pool surface can be measured using the innovative 3D sensor, the ground truth for the backside bead width needs to be measured offline after the experiment and to this end the work-work needs to appropriately cleaned/processed. Large amount of training data needed may not be easily obtained. To improve the critical ability to accurately predict the backside bead width, models need to be established from relatively small amount of training data. To this end, the authors propose to use the support vector regression (SVR) method and hypothesize that a SVR model trained using the small amount of the training data available would perform better than that a multi-layer perceptron (MLP) artificial neural network model trained using the same data. Modeling results show that for the relatively small training data available, the optimized SVR model provides a more accurate prediction to the backside bead width. As such, the authors systematically advanced the ability to accurately predict the weld joint penetration. The use of the innovative 3D sensor to obtain the 3D weld pool surface and the proposed use of the support vector method to address the small data issue played crucial roles.

Prediction algorithm of molten pool width based on support vector machine during high-power disk laser welding

Support Vector Machines-Based Method for Machining Error Prediction Modeling

Machine Learning of Weld Joint Penetration from Weld Pool Surface Using Support Vector Regression

A VMD-BP Model to Predict Laser Welding Keyhole-Induced Pore Defect in Al Butt-Lap Joint

Volumetric Error Prediction and Compensation of NC Machine Tool Based on Least Square Support Vector Machine

Prediction of weld back width based on top vision sensing during laser-MIG hybrid welding

Prediction of high power laser welding status based on PCA and SVM classification of multiple sensors

Penetration prediction of narrow-gap laser welding based on coaxial high dynamic range observation and machine learning

A study of welding process modeling based on Support Vector Machines

Prediction of molten pool temperature and processing quality in laser metal deposition based on back propagation neural network algorithm

Predicting the Backside Width of Weld Pool During Pulsed Gtaw Process Based on A Neural Network Model

Quality prediction of hot metal in blast furnace using improved support vector regression

A WELD PENETRATION PREDICTION METHOD BASED ON RBM FOR GMAW PIPE-LINE BACKING WELDING

Prediction of Bead Geometry with Changing Welding Speed Using Artificial Neural Network

The Prediction of the Building Precision in the Laser Engineered Net Shaping Process Using Advanced Networks

Construction of Beam Quality Factor Prediction Model Based on Support Vector Machine

Weld Penetration in Situ Prediction from Keyhole Dynamic Behavior under Time-Varying VPPAW Pools Via the OS-ELM Model

Predictions of Additive Manufacturing Process Parameters and Molten Pool Dimensions with a Physics-Informed Deep Learning Model

Multi-Output Monitoring of High-Speed Laser Welding State Based on Deep Learning

Prediction of Electron Beam Welding Penetration Depth Using Machine Learning-Enhanced Computational Fluid Dynamics Modelling

Real-time Weld Geometry Prediction Based on Multi-Information Using Neural Network Optimized by PCA and GA During Thin-Plate Laser Welding