Abstract:In order to improve the service quality of roads and resolve the problem of defects in the conventional asphalt pavement in service, this paper uses a 5.3% aluminate coupling agent to modify the surface of nano-ZnO and prepares a composite-modified asphalt with nano-ZnO and basalt fiber (BF) as modifiers. First, the basic performance of different types of asphalt was investigated by means of a rotary film oven experiment. Then, a dynamic shear rheology experiment was carried out to analyze the high-temperature anti-rutting performance of the composite-modified asphalt at different temperatures and frequencies. Then, using a bending creep stiffness test, the low-temperature properties of the composite-modified asphalt were investigated. Finally, the microstructure and modification mechanisms of the composite-modified asphalt were analyzed with scanning electron microscopy and infrared spectroscopy. The results indicate that the anti-aging performance of the nano-ZnO/BF composite-modified asphalt is significantly improved after adding fibers to the modified asphalt. The average mass loss ratio is only 0.192%. At 46 °C, the rutting coefficient of the composite-modified asphalt was increased by 62.3%. The frequency master curve is always at the highest position and continues to rise, indicating a significant improvement in the high-temperature anti-rutting performance of the composite-modified asphalt. At 24 °C, the creep stiffness modulus S value of the composite-modified asphalt increased by 24.9%; moreover, there is no obvious effect of improving low temperature, but the variation range of creep tangent slope m of the modified asphalt after aging is decreased, which further shows that the addition of a modifier can decrease the influence of aging on asphalt. Nanoparticles are uniformly dispersed in the asphalt and form a three-dimensional interconnected structure with BF, which effectively improves the overall performance of the asphalt. Nano-ZnO and fibers have weak chemical reactions in matrix asphalt, but they are physically dispersed and compatible.

Boosting the mechanical and fracture resistance of asphalt via biomimetic poly dopamine‐octadecylamine aramid fiber interface

Experimental investigation on the effects of a new anti-stripping additive on performance properties of asphalt and its mixtures

Investigating the adhesion and rheological properties of metal organic framework incorporated polyester fiber/zeolite imidazolium salt framework‐67‐modified asphalt composite

Applying Adsorption Kinetics of Modified Fiber to Four Components of Asphalt

Performance of biomimetic coating modified fiber incorporated styrene butadiene styrene modified asphalt

Microscale interface mechanism of the improved high and low-temperature performance of modified bamboo fibres-reinforced asphalt mixture

Mechanistic Study on the Optimization of Asphalt-Based Material Properties by Physicochemical Interaction and Synergistic Modification of Molecular Structure

Development of Interfacial Adhesive Property by Novel Anti-Stripping Composite between Acidic Aggregate and Asphalt

Controllable synthesis of network polyacrylate from hyperbranched polyesters and their effect to bond strength of asphalt

Modification and Enhancing Contribution of Fiber to Asphalt Binders and Their Corresponding Mixtures: A Study of Viscoelastic Properties

Optimization and characterization of composite modified asphalt with pyrolytic carbon black and chicken feather fiber

Study on the modified fiber with nacre layer structure based on bionic coating and molybdenum disulfide co‐construction incorporated asphalt

Improving mechanical and thermal properties of short carbon fiber/polyamide 6 composites through a polydopamine/nano‐silica interface layer

Effect of the fiber surface treatment on the mechanical performance of bamboo fiber modified asphalt binder

Non-destructive modification of aramid fiber by building nanoscale-coating solution to enhance the interfacial adhesion properties of the fiber-reinforced composites

Enhancing adhesive interlayer performance with waste tire rubber and amorphous poly alpha olefin compound modified asphalt

Optimized interfacial compatibility of carbon fiber and epoxy resin via controllable thickness and activated ingredients of polydopamine layer

Study on the Performance of Nano-Zinc Oxide/Basalt Fiber Composite Modified Asphalt and Mixture

Molecular dynamics study on improvement effect of polyethylene terephthalate on adhesive properties of asphalt and cement-based composite interface

Improving the interfacial adhesion between recycled carbon fibres and polyphenylene sulphide by bio-inspired dopamine for advanced composites manufacturing

Properties of polymer modified asphalt by polyphosphoric acid through molecular dynamics simulation and experimental analysis