Abstract:The evolution of electric vehicles and advanced wearable flexible devices is closely bound with battery safety. Herein, we report, a synthesis of thermally stable, flame-retardant, and flexible solid polymer electrolyte using eco-friendly materials such as cellulose triacetate, PEGMA, and ionic liquid PYR14TFSI. PYR14TFSI and salt LiTFSI were added to the polymer to make a solid polymer electrolyte (PCIL). The conductivity of PCIL at normal temperatures is observed to be 5.24 × 10–3 S cm–1, which further increased to 1.03 × 10–2 S cm–1 at 70 °C. An average transference number (t+) of about 0.43 has been observed for PCIL, which is much better than that for the liquid electrolyte. Moreover, PCIL, being highly stable up to 5 V, can be employed in high-voltage applications. The half cell with LFP as cathode displays the 1st discharge capacity of 125 mAh g–1 at room temperature. It's interesting to note that, after 50 cycles, the cell retains an initial discharge capacity of 76% at room temperature. Additionally, electrospun derived carbon exhibits first discharge capacity at 340 mAh g–1 which reduced to 216 mAh g–1 after 40 cycles. It should be noted that these cycling studies were carried out at ambient temperature, and it was also noted that the synergic effect of polymeric and ionic liquid systems at higher temperatures leads to an increase in mobility of charge carriers, which ultimately confers easier ionic transport and improved storage capacity. The present SPE PCIL may have potential in high-voltage LIBs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c06309?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c06309</a>.1H NMR spectrum of 1-butyl-1-methylpyrrolidinium bis(trifluoro methane sulfonyl)imide in CDCl3 (Figure S1); EDX spectrum of lithium surface after cycling (Figure S2); EDX spectrum of SPE surface after cycling (Figure S3); and table of comparison (Table S1) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c06309/suppl_file/sc0c06309_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Cellulose-Br-initiated imidazolium cation and ether linkage regulation of all-solid-state polymer electrolyte for advanced lithium transfer and battery performance

Cellulose-Br-Initiated Unique Brush-Like Architectures for Highly Efficient Multifunctional Group Synergistically Regulated Lithium Transfer and Battery Performance of an All-Solid-State Polymer Electrolyte

“Series and parallel” design of ether linkage and imidazolium cation synergistically regulated four-armed polymerized ionic liquid for all-solid-state polymer electrolyte

Cellulose Microcrystals with Brush-Like Architectures as Flexible All-Solid-State Polymer Electrolyte for Lithium-Ion Battery

Molecular Crowding Solid Polymer Electrolytes for Lithium Metal Battery by In Situ Polymerization

Synergistic Combination of Crosslinked Polymer and Concentrated Ionic Liquid for Electrolytes with High Stability in Solid-State Lithium Metal Batteries

Poly (ethylene oxide) based solid polymer electrolyte improved by multifunctional additives of poly (acrylamide) and LiI

2,2,6,6-Tetramethylpiperidine-1-oxyl-Oxidized Cellulose Nanofiber-Embedded Polymer Electrolytes for All-Solid-State Lithium Metal Batteries

Multiple ionic conduction highways and good interfacial stability of ionic liquid-encapsulated cross-linked polymer electrolytes for lithium metal batteries

Cellulose-Derived Flame-Retardant Solid Polymer Electrolyte for Lithium-Ion Batteries

Polymer dispersed ionic liquid electrolytes with high ionic conductivity for ultrastable solid‐state lithium batteries

Bacterial Cellulose Composite Solid Polymer Electrolyte With High Tensile Strength and Lithium Dendrite Inhibition for Long Life Battery

Solid Polymer Electrolytes Based On Cross-Linked Polybenzoxazine Possessing Poly(Ethylene Oxide) Segments Enhancing Cycling Performance Of Lithium Metal Batteries

Hyperbranched PCL/PS Copolymer-Based Solid Polymer Electrolytes Enable Long Cycle Life of Lithium Metal Batteries

A Flexible Solid Polymer Electrolyte based Polymerized Ionic Liquid for High Performance Solid‐State Batteries

Solid Polymer Electrolytes with Dual Anion Synergy and Twofold Reinforcement Effect for All-Solid-State Lithium Batteries

A Three-Dimensional Co-Continuous Network Structure Polymer Electrolyte with Efficient Ion Transport Channels Enabling Ultralong-Life All Solid-State Lithium Metal Batteries

Molecular Brush with Dense PEG Side Chains: Design of a Well-Defined Polymer Electrolyte for Lithium-Ion Batteries

Flexible solid-state electrolyte based on comb-like PEG-functionalized covalent organic frameworks for lithium metal batteries

Facile Interfacial Modification Via In-Situ Ultraviolet Solidified Gel Polymer Electrolyte for High-Performance Solid-State Lithium Ion Batteries