Abstract:The use of syngas as an alternative fuel in compression ignition engines is a potential way to curb the emission of pollutants and optimize the performance of these engines. The present research studied the effect of changing fuel injection timing and adding syngas on the output of a heavy-duty diesel engine. The optimal mode of the turbulence model, fuel spray model, combustion model, and pollutant emission model was used to solve computational fluid dynamics. Changing fuel injection timing from 70 to 10° before top dead center (BTDC) and diesel variants, including conventional diesel, diesel + 20% syngas, and diesel + 40% syngas, is the strategy studied here. It was found that the use of syngas could reduce emissions significantly. The in-cylinder mean effective pressure was the highest for diesel + 20% syngas. On the other hand, increasing the rate of syngas and retarding injection timing reduced the ignition period and in-cylinder temperature. The lowest rate of CO emission was obtained from diesel + 40% syngas at a fuel injection timing of 70° BTDC, whereas the lowest particulate matter emission was related to diesel + 40% syngas at 40° BTDC injection timing. The lowest rate of CO2 emission was related to diesel + 40% syngas at a fuel injection timing of 10° BTDC, while the same timing for conventional diesel exhibited the lowest NO X emission rate. Finally, the performance parameters of the engine including indicated power, indicated fuel consumption, and indicated thermal efficiency were decreased with the increase in syngas fraction, so that their highest values were obtained from the conventional diesel at the injection timing of 40° BTDC. In addition, an artificial neural network (ANN) model based on a standard back-propagation learning algorithm was developed for modeling the performance and emissions of the engine. The results for the optimum ANN model showed that the optimal ANN has two hidden layers with 20-25 neurons and the transfer function of logsig-logsig for hidden layers 1 and 2, respectively, and can predict different parameters of the engine for different modes. The correlation coefficients (R-value) of optimal topology for training, validation, and testing are 0.99992, 0.96612, and 0.93424, respectively. The results for the optimum ANN model showed that the constructed model sufficiently predicts the performance and emissions of the CI diesel engine.

Modeling, Sensitivity Analysis, and Optimization of the Methanol-to-Gasoline Process using Artificial Intelligence Methods

Simultaneous study of different combinations of ZSM-5 templates and operating conditions in the MTP process; designing, modeling, and optimization by RSM-ANN-GA

Neuro-genetic Machine Learning Framework Accelerates the Optimization of Ag/MnOx Catalyst for Total Oxidation of Toluene

Neuro-Internal Model Based Optimal Control for Gasoline Blending Processes

Liquid fuel production from syngas: Simulation and optimization using artificial neural network

Artificial Neural Network Modeling and Numerical Simulation of Syngas Fuel and Injection Timing Effects on the Performance and Emissions of a Heavy-Duty Compression Ignition Engine

Kinetic Modeling and Techno-Economic Analysis of a Methanol-to-Gasoline Production Repurposed Refinery Equipment

Investigation and optimization of olefin purification in methanol-to-olefin process based on machine learning approach coupled with genetic algorithm

Experimental investigation and artificial neural network-based modelling of thermal barrier engine performance and exhaust emissions for methanol-gasoline blends

Hybrid Modeling of Methanol to Olefin Reaction Kinetics Based on the Artificial Neural Network

Optimization of biofuel production from biomass using montmorillonite catalyst by development of predictive models

Genetic‐based multi‐objective optimization of alkylation process by a hybrid model of statistical and artificial intelligence approaches

Response Surface Methodology and Artificial Neural Networks-Based Yield Optimization of Biodiesel Sourced from Mixture of Palm and Cotton Seed Oil

Elucidating the effect of process parameters on the production of hydrogen-rich syngas by biomass and coal Co-gasification techniques: A multi-criteria modeling approach

Integrated process for simulation of gasification and chemical looping hydrogen production using Artificial Neural Network and machine learning validation

Process Configuration Studies of Methanol Production via Carbon Dioxide Hydrogenation: Process Simulation-Based Optimization Using Artificial Neural Networks

Modelling of Biomass Gasification Through Quasi-Equilibrium Process Simulation and Artificial Neural Networks

Process Integration of Hydrogen Production Using Steam Gasification and Water‐Gas Shift Reactions: A Case of Response Surface Method and Machine Learning Techniques

Gas–solid reactor optimization based on EMMS-DPM simulation and machine learning

Genetic Algorithms and Neural Networks in Optimization of Sorbent Enhanced H2 Production in FB and CFB Gasifiers

Material and Performance Optimisation for Syngas Preparation Using Artificial Intelligence (AI)-Based Machine Learning (ML)