Abstract:This study examined the effect of potassium permanganate (KMnO4)-modified activated carbon for formaldehyde removal under different face velocities and different initial formaldehyde concentrations in building environment. We chose the coconut shell activated carbon due to their high density and purity. Moreover, they have a clear environmental advantage over coal-based carbons, particularly in terms of acidification potential. The chemical properties were characterized by FTIR to show the functional groups, EDS to calculate each component of their energy bands to know how the ratio is. Also, the morphology of the surface was examined with scanning electron microscopy (SEM). The BET determines specific surface area, pore size, and pore volume. It was found that where the initial formaldehyde concentration and the face velocity are low, adsorption capacity is high. The adsorption isotherms of formaldehyde on modified activated carbon are well fitted by both Langmuir and Freundlich equations. The rate parameter for the pseudo-first-order model, pseudo-second-order model, and intraparticle diffusion model was compared. The correlation coefficient of pseudo-second-order kinetic model (0.999 > R2 > 0.9548) is higher than the coefficient of pseudo-first-order kinetic model (0.5785 < R2 < 0.8755) and intraparticle diffusion model (0.9752 < R2 < 0.9898). Thus, pseudo-second-order kinetic model is more apposite to discuss the adsorption kinetic in this test, and the overall rate of the modified activated carbon adsorption process appears to be influenced by more than one step that is both the intraparticle diffusion model and membrane diffusion.

Adsorption of Basic Violet 14 in Aqueous Solutions Using KMnO4-modified Activated Carbon.

The adsorption of Sb(Ⅲ) in aqueous by KMnO_4-modified activated carbon

Preparation of Fe-loaded Activated Carbon and Its Adsorption Property of U(VI) in Aqueous Solution

Dye adsorption properties of carbonized sludge and its application for treating dyeing wastewater

Active carbon from Thalia dealbata residues: Its preparation and adsorption performance to crystal violet

Simultaneous Adsorption/Reduction Of Bromate By Nanoscale Zerovalent Iron Supported On Modified Activated Carbon

Study On The Adsorption Of Dyes Using Diatomite And Activated Carbon

Characterization and adsorption capacity of potassium permanganate used to modify activated carbon filter media for indoor formaldehyde removal

Potassium permanganate dye removal from synthetic wastewater using a novel, low-cost adsorbent, modified from the powder of Foeniculum vulgare seeds

Effect of Acid and Hydrothermal Treatments on the Dye Adsorption Properties of Biomass-Derived Activated Carbon

Adsorption of Ni 2+ in aqueous solution by KMnO 4 modified biomass: investigation on adsorption kinetics and modification mechanism

Treatment of Dye Wastewater with Permanganate Oxidation and in Situ Formed Manganese Dioxides Adsorption: Cation Blue As Model Pollutant

Preparation of High Specific Surface Area and High Adsorptive Activated Carbon by KOH Activation

Adsorption of EDTA on Activated Carbon from Aqueous Solutions

Basic Violet 10 (BV10) removal from aqueous solutions using sawdust of Swietenia mahagoni (Mahogany trees): adsorbent characterization, adsorption isotherm, kinetics, and thermodynamic studies

Adsorption properties of methylene blue from wastewater by activated carbon

Improved adsorption properties of tetracycline on KOH/KMnO4 modified biochar derived from wheat straw

Adsorption of Methylene Blue in Water onto Activated Carbon by Surfactant Modification

Adsorption of anionic wood dyes on KOH-activated carbons from Pinus radiata sawdust

Preparation of Sludge-Based Activated Carbon and Its Application in Dye Wastewater Treatment

Removal of Mn from aqueous solutions, by activated carbon obtained from tire residuals