Abstract:Monodisperse tetra-layer hybrid microspheres, the types of SiO2/anionic polymer/SiO2/anionic polymer and SiO2/anionic polymer/SiO2/cationic polymer, were prepared by a four-step synthetic procedure. The hollow double-shelled electrolyte microspheres, with either anionic species (-41.43 similar to -54.65 mV) on both shells or zwitterionic structures on the inner and outer shells, were prepared via combination of distillation precipitation polymerization and sol-gel method for the preparation of the tetra-layer inorganic/polymer hybrid microspheres together with the subsequently selective removal of silica core and sandwiched layer. In such a process, the modified Stober sol-gel technique was utilized for synthesis of silica inner core and the sandwiched third layer for these tetra-layer inorganic/polymer hybrid microspheres. The P(EGDMA-co-MAA) and P(DVB-co-St) polymeric layers were synthesized via the radical capture of EGDMA/MAA and DVB/St comonomers as well as their co-oligomers from the vinyl groups as the reactive sites with presence of the 3-(methacryloxy)propyl trimethoxysilane (MPS) silica nanoparticles as the seeds during the distillation precipitation polymerization. The outer P(DVB-co-StMPPy(+)Cl(-)) shell was further developed by a surface pyridinium reaction between the chloromethyl group on the surface of polymer network and the pyridine via suspension of SiO2/P(EGDMA-co-MAA)/SiO2/P(DVB-co-St) tetra-layer microspheres with various DVB crosslinking degrees (30 vol%, 50 vol% and 60 vol%) in pyridine. Transmission electron microscopy (TEM), Fourier transfer infrared spectra (FTIR) and zeta potential were systematically used for characterization of the morphology, chemical components and surface charges of these hollow double-layer polyelectrolyte microspheres. The resultant multi-layer inorganic silica/polymer multi-layer hybrid microspheres had smooth surface with regular shape with efficient interaction between the polymer layer and the inorganic species. The shape of the polymeric shells were deformed in the hollow polyelectrolyte microspheres due to shrinkage and collapse of the shells when they were slightly crosslinked. The thicknesses (12 - 59 nm) and zeta-potentials (8.82 - 39.82 mV) of the polymeric shell-layer can be facilely adjusted by changing the amount of DVB crosslinker in the comonomers (0.30 - 0.60) in the synthesis. The hollow double polymer electrolyte microspheres have great potential for applications as the active components in the field of methanol fuel cell for water reservoirs with high proton conductivity due to its huge cavities and zwitter-ionic channels for electron conductivity.

Preparation and Characterization of Low Density Polystyrene/tio2 Core–shell Particles for Electronic Paper Application

Preparation of PS/TiO2/UF Multilayer Core–shell Hybrid Microspheres with High Stability

Slightly surface-functionalized polystyrene microspheres prepared via Pickering emulsion polymerization using for electrophoretic displays

Preparation and Characterization of High Contrast Electrophoretic Display Suspension Containing Charged Black-and-white Nanoparticles

Dielectric Properties of Polystyrene Based Composites Filled with Core-Shell BaTiO3/polystyrene Hybrid Nanoparticles

Polystyrene@TiO2 core-shell microsphere colloidal crystals and nonspherical macro-porous materials.

Preparation of polystyrene@Ni@Cu core–shell microspheres by pickering emulsion polymerization and their autonomous motion in a magnetic field applied to anisotropic conductive films

Preparation of Polystyrene/Sio2 Composite Nanoparticles Bearing Sulfonic Groups on the Surface Via Emulsion Copolymerization Using A Polymerizable Emulsifier

Preparation And Characterization Of Electronic Ink For Dual Particles Electrophoretic Display

The Preparation of Polystyrene/nickel Core-Shell Particles for Anisotropic Conductive Films (Acfs)

Adjusting the charging behavior of TiO2 with basic surfactants in an apolar medium for electrophoretic displays

Preparation and Characterization of Carbon Black/Acrylic Copolymer Hybrid Particles for Dual Particle Electrophoretic Display

Preparation and Electrorheological Properties of Peanut‐Like Hollow Core–Shell Structure TiO2@SiO2 Nanoparticles

Tailoring Surface Structure of Polymer Nanospheres in Pickering Emulsion Polymerization.

Preparation of Electric and Magnetic Ps@Ni@Cu Core-Shell Microspheres for Anisotropic Conductive Films

Preparation and Characterization of Fe3O4/SiO2 Particles for Dual-Particle Electrophoretic Display

Preparation and characterization of micron-sized polystyrene/polysiloxane core/shell particles

Preparation of Electrophoretic Ink Microcapsules and Electrophoretic Display Prototype

Preparation and Characterization of Polystyrene/ag Core–shell Microspheres – A Bio-Inspired Poly(dopamine) Approach

Dispersion of Titania Powder in an Electronic Ink for Electrophoretic Display

Preparation and Charecterization of Charged Hollow Double-layer Polyelectrolyte Microspheres