Abstract:We propose and demonstrate a four-wavelength-switchable erbium-doped fiber laser (4WS-EDFL) with a four-channel superimposed high-birefringence fiber Bragg grating (SI-HBFBG) and a dual-coupler ring based compound-cavity (DCR-CC) filter. Both for the first time, a SI-HBFBG as a four-channel reflective filter is used in a multi-wavelength switchable fiber laser to define wavelength channels and a DCR-CC filter is used to select a single mode from dense longitudinal-modes in a fiber laser. We present in detail how to design, fabricate, and characterize the DCR-CC filter with both theoretical analysis and experimental results, which we believe is the first systematic approach for making a compound-cavity based filter used for selecting single-longitudinal mode (SLM) in a fiber laser. The enhanced polarization hole burning effect in a 2.9 m long erbium-doped fiber, coiled inside a three-loop polarization controller, and the polarization-mismatch-induced losses are introduced into the laser cavity to achieve wavelength-switching operations. We show that the 4WS-EDFL can be switched among fifteen lasing states, including four single-wavelength operations, six dual-wavelength operations, four three-wavelength operations and one four-wavelength operation, all with high stability. For demonstration, in switchable single-wavelength operations, the four SLM lasing outputs measured are all with an optical signal to noise ratio of >80 dB, a linewidth of <700 Hz, a relative intensity noise of ≤-156.7 dB/Hz at frequencies over 3 MHz, an output power fluctuation of ≤0.555 dB and excellent polarization characteristics.

Switchable single-longitudinal-mode dual-wavelength erbium-doped fiber ring laser incorporating a semiconductor optical amplifier.

Switchable single-longitudinal-mode dual-wavelength fiber ring laser using hybrid gain medium

Wavelength-Spacing Tunable Multi-Wavelength Erbium-Doped Fiber Laser Incorporating A Semiconductor Optical Amplifier

A switchable and stable single-longitudinal-mode, dual-wavelength erbium-doped fiber laser assisted by Rayleigh backscattering in tapered fiber

Single-Longitudinal-Mode Erbium-Doped Fiber Ring Laser Based on High Finesse Fiber Bragg Grating Fabry–PÉrot Etalon

A Widely Tunable Single-Longitudinal-mode Ytterbium-Doped Fiber Laser Based on Fiber Lyot Filter

Multi-wavelength switchable erbium-doped fiber laser based on a hybrid filter incorporating a bi-tapered Mach–Zehnder interferometer and Sagnac loop

Four-wavelength-switchable SLM fiber laser with sub-kHz linewidth using superimposed high-birefringence FBG and dual-coupler ring based compound-cavity filter

Uniform Amplitude Multi-Wavelength Single-Longitudinal-Mode Brillouin-Erbium Fiber Lasers

Switchable Multiwavelength Erbium-Doped Fiber Laser with Cascaded Fiber Bragg Gratings and Dual-Section Lyot–Sagnac Filter

A 100 Mw-Level Single-Mode Switchable Dual-Wavelength Erbium-Doped Fiber Laser

Wavelength switchable semiconductor laser using half-wave V-coupled cavities.

Multi-Wavelength Fiber Ring Laser with Semiconductor Optical Amplifier

Multiwavelength Fiber Ring Laser Based on A Semiconductor and Fiber Gain Medium

Tunable and switchable dual-wavelength Er-doped fiber ring laser using ASEs

Multi-wavelength mode-locked fiber ring laser operating in L-band with semiconductor optical amplifier

Stable Single-Longitudinal-mode Fiber Laser Using PM FBG F-P Etalon and PM Fiber Saturable Absorber

16-Wavelength-switchable Single-Longitudinal-mode Fiber Laser Based on Linear Cavity with Cascaded Sagnac Loop Filters

A dual-wavelength and dual-repetition-rate actively mode-locked fiber ring laser

Switchable Multi-Wavelength Mode-Locked Linear-Cavity Fiber Laser of Cylindrical Vector Beam

Dispersion-tuned multiwavelength actively mode-locked fiber laser using a hybrid gain medium