Abstract:In the past 60 years, both the runoff and sediment load in the Yellow River Basin showed significant decreasing trends owing to the influences of human activities and climate change. Quantifying the impact of each factor (e.g. precipitation, sediment trapping dams, pasture, terrace, etc.) on the runoff and sediment load is among the key issues to guide the implement of water and soil conservation measures, and to predict the variation trends in the future. Hundreds of methods have been developed for studying the runoff and sediment load in the Yellow River Basin. Generally, these methods can be classified into empirical methods and physical-based models. The empirical methods, including hydrological method, soil and water conservation method, etc., are widely used in the Yellow River management engineering. These methods generally apply the statistical analyses like the regression analysis to build the empirical relationships between the main characteristic variables in a river basin. The elasticity method extensively used in the hydrological research can be classified into empirical method as it is mathematically deduced to be equivalent with the hydrological method. Physical-based models mainly include conceptual models and distributed models. The conceptual models are usually lumped models (e.g. SYMHD model, etc.) and can be regarded as transition of empirical models and distributed models. Seen from the publications that less studies have been conducted applying distributed models than empirical models as the simulation results of runoff and sediment load based on distributed models (e.g. the Digital Yellow Integrated Model, the Geomorphology-Based Hydrological Model, etc.) were usually not so satisfied owing to the intensive human activities in the Yellow River Basin. Therefore, this study primarily summarizes the empirical models applied in the Yellow River Basin and theoretically analyzes the main causes for the significantly different results using different empirical researching methods. Besides, we put forward an assessment frame for the researching methods of the runoff and sediment load variations in the Yellow River Basin from the point of view of inputting data, model structure and result output. And the assessment frame was then applied in the Huangfuchuan River.

Comparison among several wetted perimeter methods to determine the minimum environmental flows of rivers

Estimation of Watershed Hydrologic Processes in Arid Conditions with a Modified Watershed Model

Impact Of Two Calibration Strategies On Flow Simulation In Qiantang River Basin, China

Comparison of Design and Selection of Standard Parshall Flume in Sewage Treatment Plant

Sensitivity Analysis of Parameters of Storm Water Management Model with Sobol Method

Intercomparison of ten ISI-MIP models in simulating discharges along the Lancang-Mekong River basin

Research on the improvement of wetted perimeter method and application in seasonal rivers—a case study of Fenhe River, China

Improvement Of The Calculation Of The Amount Of Water And Sediment Discharge At Weirs With A New Integral Equation Method

Estimation of discharges of water flows and debris floods in a small watershed

Comparing Flow Duration Curves and Discharge Hydrographs to Assess Eco-flows

Improved method for identifying Manning’s roughness coefficients in plain looped river network area

Contrast Analysis of Flow-Discharge Measurement Methods in a Wide–Shallow River During Ice Periods

Environmental Flow Assessment for Benthic Macroinvertebrate Communities Using Pseudo‐2d Hydraulic Habitat Modelling at a Green Small Hydropower Plant

Improvement of the Calculation Accuracy about the Amount of Water Discharge Using an Integral Equation in Hydrological Experiments

Simplified Lake Surface Area Method for the Minimum Ecological Water Level of Lakes and Wetlands

Function formula for first flush analysis in mixed watersheds: A comparison of power and polynomial methods

Development and application of a mathematical model for calculating the discharge of non-standard thin-plate weirs in urban combined sewer overflow systems: a case study

Comparison of the various methodologies used in studying runoff and sediment load in the Yellow River Basin

Hydraulic Correction Method (HCM) to Enhance the Efficiency of SRTM DEM in Flood Modeling

Comparing the Economic and Environmental Effects of Different Water Management Schemes Using a Coupled Agent–Hydrologic Model

Clarifying the correlations between hydraulic indicators evaluating the hydraulic performance of free water surface constructed wetlands