Abstract:Membrane separation is an effective solution for pollutant removal, however, achieving high permeability and antifouling ability remains a pressing challenge for its widespread application. In this study, a novel method of coating flat ceramic membranes (CMs) with a conductive film (Sb-SnO 2 ) was developed to enhance the filtration and antifouling performance of CMs when the membrane filtration was coupled with electrocoagulation. After comparing the parameters, including the film sheet resistance and pure water flux, with those of other coating methods (i.e., gel coating and immersion hydrolysis), a well-fixed conductive coating with optimal permeability and stability was generated using spray pyrolysis with a substrate ceramic membrane surface temperature of 475 °C, precursor concentration of 0.5 M (calculate as SnO 2 ), and spraying amount of 50 mL (120 cm 2 ), during membrane modification. Batch filtration experiments using wastewater from the mechanical industry demonstrated that the conductive ceramic membrane (CCM) cathode integrated with electrocoagulation at an electric field of 2.8 V/cm (3.0 mA/cm 2 ) achieved permeate fluxes that were 0.34, 0.70, 0.75 and 1.41 times higher than those of sole CM separation after four cycles. Moreover, the membrane separation process was dominated by the standard pore-blocking model, and its correlation coefficient decreased with the exertion of the electric field, indicating that membrane filtration fouling changed from irreversible to reversible. This CCM combined with electrocoagulation exhibited significant potential for alleviating membrane fouling and widespread application, and could act as a promising technology for industrial wastewater treatment.

Treatment of Heavy Metal Wastewater by Polymer- Assisted Ceramic Membrane Separation Technology

The Efficient Removal of Low Concentration Hexavalent Chromium Via Combining Charged Microporous Membrane and Micellar Adsorption Filtration

Positively Charged PVC Ultrafiltration Membrane Via Micellar Enhanced Ultrafiltration for Removing Trace Heavy Metal Cations

A Positively Charged Tight UF Membrane and Its Properties for Removing Trace Metal Cations Via Electrostatic Repulsion Mechanism.

Separation of strontium from high sodium-containing wastewater by inorganic ceramic nanofiltration membrane

Radioactive Waste Water Treatment by Inorganic Membrane System

Advances in Research on Treatment of Heavy Metal Ions Wastewater by Agricultural Waste

Removal of Strontium and Cobalt Ions from Industrial Wastewater by Polyethyleneimine Enhanced Ultrafiltration Process

Combined Membrane-High Rate Algal Pound for Advanced Treatment of Municipal Wastewater Treatment Plant Effluent

Experimental Study on the Treatment of Low Level Radioactive Waste Water by Inorganic Nanofiltration Membrane

Membrane Combination Technique On Treatment And Remediation Of Heavy Metals Polluted Water Body

Treatment of Cathodic Electrocoating Wastewater by Coagulation and Ceramic Membrane Filtration

Treatment of Industrial Wastewater Containing Tin Using Complexation- Ultrafiltration Coupling Process

Porous sodium alginate/cellulose nanofiber composite hydrogel microspheres for heavy metal removal in wastewater

Application of Membrane Separation Technology in Electroplating Wastewater Treatment and Resource Recovery: A Review

Treatment of electroplating wastewater using electrocoagulation and integrated membrane

TREATMENT OF HIGH CONCENTRATION PHOSPHORUS-CONTAINING WASTEWATER BY CERAMIC MEMBRANE COAGULATION REACTOR(CMCR)

Research Progress in Treatment of Heavy Metal Wastewater Using the Hybrid Process of Complexation-Ultrafiltration-electrodeposition

Polyethyleneimine/4,4′-Bis(chloromethyl)-1,1′-biphenyl nanofiltration membrane for metal ions removal in acid wastewater

Membrane Technology and Its Application in Heavy Metal Wastewater Treatment

Electrocoagulation coupled with conductive ceramic membrane filtration for wastewater treatment: Toward membrane modification, characterization, and application