Abstract:Heat transfer can be augmented by employing different methodologies and techniques, such as increasing either the heat transfer surface or the heat transfer coefficient between fluid and surface that allows high heat transfer rates in a small volume. The enhanced thermal behavior of nanofluids could supply a basis for a huge innovation in heat transfer intensification. Recently, a new type of nanofluid, known as hybrid nanofluid, which consists of a mixture of two different nanoparticles suspended in the base fluid like water. The present study deals with the analysis of laminar mixed convection heat transfer in horizontal annuli using hybrid nanofluid with the thermal boundary condition of constant heat flux at the inner wall and isothermal outer wall. The SIMPLER numerical algorithm is adopted in the present study. The hybrid nanofluid consists of water as base fluid and Ag-TiO2 as nanoparticles. The ratio of Ag to TiO2 is maintained as 1:3. Main objective of the present study is to compute numerically three-dimensional axis-symmetric, incompressible, steady, laminar flow through annular ducts to investigate the effect of the hybrid nanofluid Ag-TiO2/water on thermal-hydrodynamic characteristics. The analysis reveals that secondary flow due to the buoyancy forces plays an important role in augmenting heat transfer. The development of axial flow and temperature field are strongly found to be influenced by buoyancy. Nusselt number near the entrance region is found to be maximum, then attains a minimum value at a location slightly away from the entrance, and then starts increasing slowly due to the increased buoyancy effects. Finally, the flow becomes almost stable and a nearly constant value of Nusselt number is observed as the flow approaches fully development situation. At a given axial location Nusselt number was found to increase with increasing volumetric concentration of nanoparticle. The effect of Gr Radius ratio on the Nusselt number was also studied

FLUID FLOW AND CONVECTIVE HEAT TRANSFER IN A VERTICAL POROUS ANNULUS

Natural convection heat transfer in concentric annuli with nanofluids

Forced Convective Heat-Transfer in A Vertical Annulus Filled with Porous-Media

Mixed convective heat transfer for fluid flowing through annular porous medium

A Numerical Study Of Eccentricity Effect To Heat Transfer Under Single Phase Force Convection Inside A Vertical Annulus

Analytical study of flow and heat transfer in an annular porous medium subject to asymmetrical heat fluxes

Flow and Heat Transfer Property of Oldroyd-B-Fluid-Based Nanofluids Containing Cylindrical Particles in a Pipe

Variable Permeability Effects on Natural Convection in a Vertical Porous Layer with Uniform Heat Flux from the Side

Natural Convection Heat Transfer of Water at Super-Critical Pressures in a Horizontal Annulus

FLOW NON-UNIFORMITY AND HEAT TRANSFER IN ANNULAR PLATE-FIN RADIATOR

Analytical and Numerical Study on Thermally Developing Forced Convective Flow in a Channel Filled with a Highly Porous Medium Under Local Thermal Non-Equilibrium

Heat transfer rate of power law fluid flow with variable thermal conductivity through a porous annular sector duct

Laminar Mixed Convection Heat Transfer Analysis in Horizontal Annuli using Hybrid Nanofluid

Numerical Analysis of the Enhanced Convection Heat Transfer in an Annular Finned Tube with Laminar Pulsating Flow

Laminar convective heat transfer combining buoyancy and thermal radiation of Carreau fluid within a concentric and eccentric annulus

Thermal Radiation Effect on Mixed Convective Casson Fluid Flow over a Porous Stretching Sheet with Variable Fluid Properties

Numerical investigation of forced convection heat transfer in porous media using a thermal non-equilibrium model

Simulation of Swirling Turbulent Flows and Heat Transfer in an Annular Duct

Lagrangian Dynamics and Heat Transfer in Porous-Media Convection

Flow and heat transfer characteristics of water in eccentric micro annuli

Analysis of the laminar flow and enhanced heat transfer rate through a triangular array of cylinders embedded in a fluid-saturated porous media with mixed convection