Abstract:Compressible flow past a circular cylinder at an inflow Reynolds number of 2 x 10 5 is numerically investigated by using a constrained large-eddy simulation (CLES) technique. Numerical simulation with adiabatic wall boundary condition and at a free-stream Mach number of 0.75 is conducted to validate and verify the performance of the present CLES method in predicting separated flows. Some typical and characteristic physical quantities, such as the drag coefficient, the root-mean-square lift fluctuations, the Strouhal number, the pressure and skin friction distributions around the cylinder, etc. are calculated and compared with previously reported experimental data, finer-grid large-eddy simulation (LES) data and those obtained in the present LES and detached-eddy simulation (DES) on coarse grids. It turns out that CLES is superior to DES in predicting such separated flow and that CLES can mimic the intricate shock wave dynamics quite well. Then, the effects of Mach number on the flow patterns and parameters such as the pressure, skin friction and drag coefficients, and the cylinder surface temperature are studied, with Mach number varying from 0.1 to 0.95. Non-monotonic behaviors of the pressure and skin friction distributions are observed with increasing Mach number and the minimum mean separation angle occurs at a subcritical Mach number of between 0.3 and 0.5. Additionally, the wall temperature effects on the thermodynamic and aerodynamic quantities are explored in a series of simulations using isothermal wall boundary conditions at three different wall temperatures. It is found that the flow separates earlier from the cylinder surface with a longer recirculation length in the wake and a higher pressure coefficient at the rear stagnation point for higher wall temperature. Moreover, the influences of different thermal wall boundary conditions on the flow field are gradually magnified from the front stagnation point to the rear stagnation point. Moreover, the influences of different thermal wall boundary conditions on the flow field are graduallymagnified from the front stagnation point to the rear stagnation point. It is inferred that the CLES approach in its current version is a useful and effective tool for simulating wall-bounded compressible turbulent flows with massive separations.

Large Eddy Simulation for Wind Field Analysis Based on Stabilized Finite Element Method

Constrained Large-Eddy Simulation for Aerodynamics

Large Eddy Simulation and CDNS Investigation of T106C Low-Pressure Turbine

Constrained Large-Eddy Simulation of Compressible Flow Past a Circular Cylinder

Constrained Large Eddy Simulation of Wall-Bounded Turbulent Flows

Large eddy simulation based on an improved high-precision interior penalty discontinuous Galerkin method: flow past cylinders and airfoils

Large Eddy Simulation of Turbulent Flows Passage of Reversible Runner

Large Eddy Simulation of the Wind Field and Pollution Dispersion in Building Array

Wall-Modeled Large-Eddy Simulation Method for Unstructured-Grid Navier–Stokes Solvers

Two-Dimensional Large-Eddy Simulation of Flow Past a Wind Turbine Airfoil in Deep Fall

Large eddy simulation of aerodynamic wind pressure on a tall rectangular building by modified synthetic volume forcing method

Large Eddy Simulations for 3D Turbine Blades Using a High Order Flux Reconstruction Method

Parametric study of large-eddy simulation to capture scaling laws of velocity fluctuations in neutral atmospheric boundary layers

Large Eddy Simulation of Wind Farm

High Accurate Finite Volume Method for Large Eddy Simulation of Complex Turbulent Flows

Application of Large Eddy Simulation to an Oscillating Flow Past A Circular Cylinder

Large Eddy Simulation Coupled with Immersed Boundary Method for Turbulent Flows over a Backward Facing Step

Large Eddy Simulation of High-Reynolds-number Atmospheric Boundary Layer Flow with Improved Near-Wall Correction

A new probability-distribution scale synthetic eddy method for large eddy simulation of wind loads

High Accurate Finite Volume Method on Non-Uniform Meshes for Large Eddy Simulation of Turbulent Flows

Reynolds-constrained Subgrid-scale Model for Large-eddy Simulation of Turbulent Wall Flows