Abstract:The reliable measurement of pressures on low-rise buildings in the atmospheric boundary layer (ABL) flow remains a challenge, as has been shown by the large discrepancies among results obtained in different wind tunnel facilities or even in the same wind tunnel. Two major causes of the discrepancies are the difficulty of simulating large-scale, low-frequency turbulent fluctuations uniformly across laboratories and the small scale of models in typical civil engineering wind tunnels. To address these issues, it was proposed that a simplified flow be used in laboratory simulations, rather than a conventional ABL flow. In the simplified flow the reference mean wind speed is larger than the mean wind speed of the ABL flow, and the low-frequency fluctuations present in the ABL flow are suppressed; that is, the peak energy of the missing low-frequency fluctuations is supplied in the simplified flow by the increment in the mean wind speed, which may be regarded as a flow fluctuation with zero frequency. High-frequency turbulent fluctuations, which typically affect flow reattachment, are approximately the same in the ABL and the simplified flow. Because, over small distances, low-frequency fluctuations are highly coherent spatially for small low-rise buildings with dimensions of up to approximately 20 m (e.g., single-family residential homes), the peak aerodynamic effects of the two flows may be hypothesized to be approximately the same. Preliminary experimental results obtained in University of Western Ontario’s ABL wind tunnel facility and Florida International University’s small-scale Wall of Wind facility are shown to support this hypothesis. The use of the proposed simplified flow is currently being tested by the authors for application to computational wind engineering (CWE) applications. Such use eliminates the need to simulate the lower frequency fluctuations of the boundary layer flow and thus makes it possible to achieve practical CWE calculations, and it is advantageous in experiments from the points of view of measurement accuracy, model scaling, repeatability of the simulations, and computational efficiency.

A new probability-distribution scale synthetic eddy method for large eddy simulation of wind loads

Large eddy simulation of aerodynamic wind pressure on a tall rectangular building by modified synthetic volume forcing method

An improved inflow turbulence generator for large eddy simulation evaluation of wind effects on tall buildings

Large Eddy Simulation Inflow Generation Using Reduced Length Scales for Flows Past Low-Rise Buildings

Performance of different inflow turbulence methods for wind engineering applications

Parametric study of large-eddy simulation to capture scaling laws of velocity fluctuations in neutral atmospheric boundary layers

Large Eddy Simulation of the Wind Field and Pollution Dispersion in Building Array

Consistency improved random flow generation method for large eddy simulation of atmospheric boundary layer

Wind field characteristics over hilly and complex terrain in turbulent boundary layers

Development of joint probability distribution of wind speed and direction using long-term monitoring data

A projection an-isotropic spectrum method for inflow turbulence of Large Eddy Simulation in natural ventilation of buildings

Large-eddy simulation of wind effects on a super-tall building in urban environment conditions

Effect of the Inlet Boundary Conditions on the Flow over Complex Terrain Using Large Eddy Simulation

Large eddy simulation of turbulent atmospheric boundary layer flow based on a synthetic volume forcing method

A coherence-improved and mass-balanced inflow turbulence generation method for large eddy simulation

Large Eddy Simulation of the Layout Effects on Wind Farm Performance Coupling With Wind Turbine Control Strategies

On the reliability of the dynamic terrain method to generate ABL winds for environmental applications

Large Eddy Simulation of Wind Farm

Vortex-Stretching based Large Eddy Simulation Framework for Wind Farms

Simplified Wind Flow Model for the Estimation of Aerodynamic Effects on Small Structures

Non-stationary modeling and simulation of strong winds