Abstract:High-pressure direct injection diesel/methanol dual-fuel engines exhibit excellent emission reduction potential, but they are still in the initial stage of research and development. The influences of different methanol injection locations, injection duration, and injection pressures on combustion characteristics, mixture homogeneity, and exhaust emissions are investigated to explore appropriate injection strategies and further optimize the engine performance base using CONVERGE software. The results show that the impact of the methanol injection position on the engine is relatively small, especially on combustion characteristics. A larger axial nozzle distance contributes to the formation of the homogeneous mixture, improving the engine economy. However, the engine performance is remarkably affected by methanol injection duration and methanol injection pressure. A shorter combustion duration is achieved with a decrease in the methanol injection duration and an increase in the methanol injection pressure, as a result of which the fuel economy is improved, with the combustion process more concentrated near the top dead center. Simultaneously, the mixture homogeneity is enhanced, which is conducive to a reduction in soot and CO emissions, yet not to a NOX and HC reduction. The lowest overall emissions of NOX, soot, CO, and HC are achieved when the radial nozzle distance and axial nozzle distance are 2.5 mm and 0.5 mm, respectively. Besides, the combustion characteristics and emissions of the engine are affected significantly under different methanol injection locations and injection pressures. The increased injection interval leads to deteriorating combustion characteristics and economy, i.e., a delayed combustion phase (CA50), an extended ignition delay and combustion duration (CA10–CA90), thereby increasing CO and soot emissions, but decreasing NOX emission. Additionally, the optimal economy and exhaust emissions are obtained when adopting an injection duration of 6 °CA and an injection pressure of 44.4 MPa. The ITE is increased in this case compared to the other injection strategies, thereby improving the engine performance significantly. The results provide parametric feedback and theoretical support for the design of high-pressure direct injection diesel/methanol dual-fuel engines from a time and space perspective, which has certain theoretical significance.

Development and Bench-Testing of A Common Rail System for Dimethyl Ether

Study on injection characteristics of diesel and DME

Fuel Injection System Simulation for DME Engine

Simulation on Diesel/DME Mixed Injection System

Engine Performance and Emissions of A Compression Ignition Engine Operating on the Diesel-Methanol Blends

Study on the performance and emissions of a compression ignition engine fuelled with dimethyl ether

Design of ECU for Common Rail System of Diesel Engine and Study of Injection Characteristics

Potentialities of a Common Rail Injection System for the Control of Dual Fuel Biodiesel-Producer Gas Combustion and Emissions

An Apparatus for Testing the Injector of Common Rail System on a Multifuel Rotary Engine

Parameter Study of Common Rail Pressure for Low Octane Gasoline Multiple Premixed Compression Ignition (mpci) in Light-Duty Diesel Engine

Research and development of an electronically controlled pump-pipe valve-injector fuel injection system

Numerical Investigation on the Influence of Injection Location and Injection Strategy on a High-Pressure Direct Injection Diesel/Methanol Dual-Fuel Engine

Experimental investigations of the effects of pilot injection on combustion and gaseous emission characteristics of diesel/methanol dual fuel engine

Study on Combustion Characteristics of DME Fueled Diesel Engine

Improvement of Performance and Emissions of a Compression Ignition Methanol Engine with Dimethyl Ether

An exploratory numerical study of a diesel/methanol dual-fuel injector: Effects of nozzle number, nozzle diameter and spray spacial angle on a diesel/methanol dual-fuel direct injection engine

Modelling and experimental investigation of high – pressure common rail diesel injection system

Experimental study and optimization in the layouts and the structure of the high-pressure common-rail fuel injection system for a marine diesel engine

Experimental study of effects of exhaust gas recirculation and combustion mode on combustion, emission, and performance of DME‐methanol ‐fueled turbocharged c ommon‐rail engine

Performance of A Direct Injection Diesel Engine Fuelled with A Dimethyl Ether/Diesel Blend

Effect of injection strategy on a diesel/methanol dual-fuel direct-injection engine