Surface Segregation in an FeCrP Alloy

W YUQING,CJ MCMAHON

DOI: https://doi.org/10.1016/0036-9748(86)90205-x

1986-01-01

Scripta Metallurgica

Abstract:Pour etudier les tendances de l'interaction de Cr+P, on observe par spectrometrie Auger la segregation de surface dans l'alliage Fe-1% Cr-0,03%P chauffe a 400 et 650 C. On observe les interactions de Cr+N et Cr+S mais aucune de Cr+P

What problem does this paper attempt to address?

Understanding the surface segregation behavior of transition metals on Ni(111): a first-principles study.

Yanlin Yu,Wei Xiao,Jianwei Wang,Ligen Wang

DOI: https://doi.org/10.1039/c6cp02983c

IF: 3.3

2016-01-01

Physical Chemistry Chemical Physics

Abstract:The surface composition of an alloying system has an important impact on its catalytic and chemical properties. The segregation behavior of 3d, 4d and 5d transition metals on an Ni(111) surface has been investigated by performing first-principles calculations in the framework of density-functional theory with the generalized gradient approximation for the exchange-correlation functional. Our calculated surface segregation energies are in good agreement with the experimental data as well as with previous calculated results. Most importantly, we have made an attempt to correlate the surface segregation behavior with the surface energy difference between the alloying (solute) metal and the host metal, the elastic energy release, and the heat of solution of the alloying metal in the host metal. By doing so, we not only overcome the difficulties that empirical models encounter, but also clearly identify the importance of each contribution to the segregation behavior of an alloying metal. The present study provides valuable insight into the surface segregation behavior of solute atoms in alloying systems.
Equilibrium segregation of phosphorus at grain boundaries of Fe–P, Fe–C–P, Fe–Cr–P, and Fe–Cr–C–P alloys

H. Erhart,H. J. Grabke

DOI: https://doi.org/10.1179/030634581790426877

1981-09-01

Metal Science

Abstract:The equilibrium grain-boundary segregation of phosphorus was investigated in Fe–P, Fe–C–P, Fe–Cr–P, and Fe–Cr–C–P alloys after annealing at temperatures in the range 400–800°C. The grain-boundary concentrations were determined by Auger electron spectroscopy on intergranular fracture surfaces. The phosphorus segregation in Fe–P alloys with 0·003–0·3%P can be described by the McLean equation, the free energy of segregation is ∆G° = −34 300–21·5T (J mol−1). The percentage of intergranular fracture is increased by the presence of phosphorus at grain boundaries. In Fe–C–P alloys grain-boundary segregation is affected by site competition. Increasing carbon content of the samples causes an increase of the carbon concentration and a decrease of the phosphorus concentration at the grain boundaries; the intergranular part of fracture is simultaneously lowered. The addition of chromium causes an increase of phosphorus segregation in Fe–C–P alloys but no change in Fe–P alloys. The behaviour in carbon-containing alloys is explained by the decrease of carbon activity by chromium which allows enhanced phosphorus segregation. As chromium does not affect phosphorus segregation in carbon-free alloys, there is no ‘synergistic cosegregation’ of chromium and phosphorus. The results lead to a new understanding of the influence of phosphorus on temper embrittlement of unalloyed and low-alloyed steels.
Investigation of Surface Segregation in Fe-Cr-Si Alloys by XPS

K. Idczak,R. Idczak

DOI: https://doi.org/10.1007/s11661-020-05758-5

2020-04-19

Metallurgical and Materials Transactions A

Abstract:Abstract The surface segregation of Fe-Cr-Si alloys was studied using the X-ray photoelectron spectroscopy (XPS). The experiment was performed in two stages, for the as-prepared samples and after oxidation process. Analysis of measured XPS spectra allowed one to characterize the changes in the surface chemical composition during the oxidation and thermal treatment procedures. According to the obtained results, it could be stated that the enhanced anti-corrosion properties of the Fe-Cr-Si alloys which contain more than 10 at. pct of Cr and 5 at. pct of Si in the bulk are mainly connected with the strong surface segregation process of both solutes. In the case of alloys which contain less solutes (Fe 0.94 Cr 0.03 Si 0.03 , Fe 0.90 Cr 0.05 Si 0.05 ), the behavior of Cr atoms is different during the oxidation process. Chromium does not segregate to the surface, instead it diffuses into deeper parts of the material leaving the surface covered only by silicon and iron oxides. This effect is responsible for much worse corrosion resistance of the Fe 0.94 Cr 0.03 Si 0.03 and Fe 0.90 Cr 0.05 Si 0.05 alloys.
Segregation, precipitation, and α-α' phase separation in Fe-Cr alloys: a multi-scale modelling approach

A. Kuronen,M. H. Heinonen,S. Granroth,R. E. Perälä,T. Kilpi,P. Laukkanen,J. Lång,J. Dahl,M. P. J. Punkkinen,K. Kokko,M. Ropo,B. Johansson,L. Vitos

DOI: https://doi.org/10.1103/PhysRevB.92.214113

2015-04-29

Abstract:Segregation, precipitation, and phase separation in Fe-Cr systems is investigated. Monte Carlo simulations using semiempirical interatomic potential, first-principles total energy calculations, and experimental spectroscopy are used. In order to obtain a general picture of the relation of the atomic interactions and properties of Fe-Cr alloys in bulk, surface, and interface regions several complementary methods has to be used. Using Exact Muffin-Tin Orbitals method the effective chemical potential as a function of Cr content (0-15 at.% Cr) is calculated for a surface, second atomic layer and bulk. At ~10 at.% Cr in the alloy the reversal of the driving force of a Cr atom to occupy either bulk or surface sites is obtained. The Cr containing surfaces are expected when the Cr content exceeds ~10 at.%. The second atomic layer forms about 0.3 eV barrier for the migration of Cr atoms between bulk and surface atomic layer. To get information on Fe-Cr in larger scales we use semiempirical methods. Using combined Monte Carlo molecular dynamics simulations, based on semiempirical potential, the precipitation of Cr into isolated pockets in bulk Fe-Cr and the upper limit of the solubility of Cr into Fe layers in Fe/Cr layer system is studied. The theoretical predictions are tested using spectroscopic measurements. Hard X-ray photoelectron spectroscopy and Auger electron spectroscopy investigations were carried out to explore Cr segregation and precipitation in Fe/Cr double layer and Fe_0.95Cr_0.05 and Fe_0.85Cr_0.15 alloys. Initial oxidation of Fe-Cr was investigated experimentally at 10^-8 Torr pressure of the spectrometers showing intense Cr_2O_3 signal. Cr segregation and the formation of Cr rich precipitates were traced by analysing the experimental spectral intensities with respect to annealing time, Cr content, and kinetic energy of the exited electron.

Materials Science
Effect of surface hydrogen on the anomalous surface segregation behavior of Cr in Fe-rich Fe-Cr alloys

Michèle Gupta,Raju P. Gupta,Maximilien Levesque

DOI: https://doi.org/10.48550/arXiv.1307.7588

2013-07-29

Materials Science

Abstract:The segregation behavior of Cr in dilute Fe-Cr alloys is known to be anomalous since the main barrier for surface segregation of Cr in these alloys arises not from the topmost surface layer but from the subsurface layer where the solution energy of Cr is much more endothermic as compared to the topmost surface layer. The Fe-Cr alloys are candidate structural materials for the new generation of nuclear reactors. The surfaces of these alloys will be exposed to hydrogen or its isotopes in these reactors, and although hydrogen is soluble neither in Fe nor in Fe-Cr alloys, it is known that the adsorption energy of hydrogen on the surface of iron is not only exothermic but relatively large. This clearly raises the question of the effect of the hydrogen adsorbed on the surface of iron on the segregation behavior of chromium towards the surface of iron. In this paper we show, on the basis of our ab initio density functional theory calculations, that the presence of hydrogen on the surface of iron leads to a considerably reduced barrier for Cr segregation to both the topmost surface layer and the subsurface layer, but the subsurface layer still controls the barrier for surface segregation. This reduction in the barrier for surface segregation is due to the nature of the Cr-H couple that acts in a complex and synergistic manner. The presence of Cr enhances the exothermic nature of hydrogen adsorption that in turn leads to a reduced barrier for surface segregation. These results should be included in the multiscale modeling of Fe-Cr alloys.
Anomalous Surface Segregation Profiles in Ferritic FeCr Stainless Steel

Maximilien Levesque

DOI: https://doi.org/10.48550/arXiv.1302.2838

2013-02-12

Materials Science

Abstract:The iron-chromium alloy and its derivatives are widely used for their remarkable resistance to corrosion, which only occurs in a narrow concentration range around 9 to 13 atomic percent chromium. Although known to be due to chromium enrichment of a few atoms thick layer at the surfaces, the understanding of its complex atomistic origin has been a remaining challenge. We report an investigation of the thermodynamics of such surfaces at the atomic scale by means of Monte Carlo simulations. We use a Hamiltonian which provides a parameterization of previous ab initio results and successfully describes the alloy's unusual thermodynamics. We report a strong enrichment in Cr of the surfaces for low bulk concentrations, with a narrow optimum around 12 atomic percent chromium, beyond which the surface composition decreases drastically. This behavior is explained by a synergy between (i) the complex phase separation in the bulk alloy, (ii) local phase transitions that tune the layers closest to the surface to an iron-rich state and inhibit the bulk phase separation in this region, and (iii) its compensation by a strong and non-linear enrichment in Cr of the next few layers. Implications with respect to the design of prospective nanomaterials are briefly discussed.
First‐principles Study of Surface Segregation in Bimetallic Ni3M (M = Mo, Co, Fe) Alloys with Chemisorbed Atomic Oxygen

Yanlin Yu,Jingguo Zhang,Wei Xiao,Jianwei Wang,Ligen Wang

DOI: https://doi.org/10.1002/pssb.201600810

2017-01-01

physica status solidi (b)

Abstract:Segregation at metal alloy surfaces has an important impact on their catalytic and chemical properties. We have performed density‐functional theory calculations to investigate the surface segregation behaviors of Ni3M (M = Mo, Co, Fe) alloys in the presence of chemisorbed atomic oxygen. The calculated results show that the segregation trend at a Ni3M(111) surface can be substantially modified by reactive gaseous environments. At an oxygen coverage of 1/4 ML, both the Ni‐segregated and M‐segregated surfaces are still less stable than the nonsegregated one for Ni3Fe alloy, while an M‐segregated surface is more stable than the nonsegregated one for Ni3M (M = Mo, Co) alloys. Furthermore, the analysis of oxygen adsorption trends and surface electronic structures explains that the surface segregation trend is directly correlated to the surface–adsorbate binding strength. The present study provides valuable insight for exploring practical applications of Ni‐based alloys as hydrogen‐evolution electrodes.
First-principles Investigation into the Effect of Cr on the Segregation of Multi-H at the Fe Σ3 (111) Grain Boundary

Bingling He,Wei Xiao,Wei Hao,Zhixue Tian

DOI: https://doi.org/10.1016/j.jnucmat.2013.06.015

IF: 3.555

2013-01-01

Journal of Nuclear Materials

Abstract:First-principles calculations were carried out to investigate the effect of Cr on segregation of multiple H atoms in the Σ3 (1 1 1) grain boundary in bcc Fe. In the absence of Cr, four H atoms can be trapped at the interstitial site of the Fe grain boundary (areal density: 28 nm−2), and no H2 molecules are formed. The presence of Cr, however, suppresses the segregation tendency of H and only two H atoms can be trapped at this grain boundary. Although the volume expansion associated with the segregation of Cr to the grain boundary promotes H segregation, such a booting effect is unable to remedy the repulsion of H resulted from charge density increase in the grain boundary core. As a consequence, Cr mitigates H aggregation at the Σ3 (1 1 1) grain boundary in bcc Fe.
Interfacial Segregation and Precipitates Behavior in the Ultrafine Grained Al-based Metal Matrix Composites

Chuandong Wu,Jian Zhang,Guoqiang Luo,Qiang Shen,Zhanghua Gan,Jing Liu,Lianmeng Zhang

DOI: https://doi.org/10.1016/j.jallcom.2018.08.183

IF: 6.2

2019-01-01

Journal of Alloys and Compounds

Abstract:To provide insight into interfacial segregation and precipitates behavior in the ultrafine grained Al-based metal matrix composites, AA7075/B4C composite was selected as the model system. The bulk composite was synthesized via cryomilling, field assistant sintering and followed heat treatment. The segregation layer of MgO was observed to increase from similar to 15 nm to 20-25 nm during heat treatment due to faster solute diffusion caused by the Al/B4C interface and large volume fraction of grain boundaries. In addition to the segregation, representative TEM results show that the spherical GP zone and platelet eta' precipitates distribute in grain interior, while several coarser it precipitates located at LAGB and HAGB with the orientation relationship of (0001)//(11(-)1) and [101(-)0](eta)//[110](Al). However, the precipitates at LAGB exhibit finer size relative to those at HAGB, which could be ascribed to the higher accumulation of solute atoms at HAGB to favor the growth and coarsening of the precipitation during heat treatment. (C) 2018 Elsevier B.V. All rights reserved.
Grain Boundary Specific Segregation in Nanocrystalline Fe(Cr)

Xuyang Zhou,Xiao-Xiang Yu,Tyler Kaub,Richard L Martens,Gregory B Thompson

DOI: https://doi.org/10.1038/srep34642

2016-10-06

Abstract:A cross-correlative precession electron diffraction - atom probe tomography investigation of Cr segregation in a Fe(Cr) nanocrystalline alloy was undertaken. Solute segregation was found to be dependent on grain boundary type. The results of which were compared to a hybrid Molecular Dynamics and Monte Carlo simulation that predicted the segregation for special character, low angle, and high angle grain boundaries, as well as the angle of inclination of the grain boundary. It was found that the highest segregation concentration was for the high angle grain boundaries and is explained in terms of clustering driven by the onset of phase separation. For special character boundaries, the highest Gibbsain interfacial excess was predicted at the incoherent ∑3 followed by ∑9 and ∑11 boundaries with negligible segregation to the twin and ∑5 boundaries. In addition, the low angle grain boundaries predicted negligible segregation. All of these trends matched well with the experiment. This solute-boundary segregation dependency for the special character grain boundaries is explained in terms of excess volume and the energetic distribution of the solute in the boundary.
Surface segregation of PdM (M=Cu, Ag, Au) alloys and its implication to acetylene hydrogenation, DFT-based Monte Carlo simulations

Zong-Jian Wang,Jiyu Chen,Yugai Huang,Zhao-Xu Chen

DOI: https://doi.org/10.1016/j.mtcomm.2021.102475

IF: 3.8

2021-01-01

Materials Today Communications

Abstract:•A DFT-based Monte Carlo method is proposed to study alloy surface segregation.•Adsorption of carbon-containing species and H favors Pd segregation.•Adsorption energy on ideal surfaces correlate linearly with that of segregated ones.•d-band centers of ideal surfaces correlate linearly with that of segregated ones.
Surface parameters of ferritic iron-rich Fe-Cr alloy

Stephan Schönecker,Se Kyun Kwon,Börje Johansson,Levente Vitos

DOI: https://doi.org/10.1088/0953-8984/25/30/305002

2013-06-20

Abstract:Using first-principles density functional theory in the implementation of the exact muffin-tin orbitals method and the coherent potential approximation, we studied the surface energy and the surface stress of the thermodynamically most stable surface facet (100) of the homogeneous disordered body-centred cubic iron-chromium system in the concentration interval up to 20 at.% Cr. For the low-index surface facets of Fe and Cr, the surface energy of Cr is slightly larger than the one of Fe, while the surface stress of Cr is considerably smaller than the one of Fe. We find that Cr addition to Fe generally increases the surface energy of the Fe-Cr alloy, however, an increase of the bulk amount of Cr also increases the surface stress. As a result of this unexpected trend, the (100) surface of Fe-Cr becomes more stable against reconstruction with increasing Cr concentration. We show that the observed trends are of magnetic origin. In addition to the homogeneous alloy case, we also investigated the impact of surface segregation on both surface parameters.

Materials Science,Disordered Systems and Neural Networks
Grain boundary nanochemistry and intergranular corrosion of Fe-0.01wt.%P alloy: Roles of elemental segregations and misorientation

Saya Ajito,Kazuya Tojima,Hiroshi Kakinuma,Kohei Ikeda,Yongjie Zhang,Tomohiko Hojo,Goro Miyamoto,Motomichi Koyama,Tadashi Furuhara,Eiji Akiyama

DOI: https://doi.org/10.1016/j.actamat.2024.120577

IF: 9.4

2024-11-25

Acta Materialia

Abstract:The grain boundary (GB) segregation of alloying elements in an ultralow carbon Fe–P alloy was investigated at different annealing temperatures (500 °C, 600 °C, and 700 °C) using a three-dimensional atom probe. The impact of the segregated phosphorus and carbon concentrations on intergranular corrosion was also assessed in a sodium sulfate (Na 2 SO 4 ) aqueous solution. Comparative analysis of specimens annealed at 600 °C and 700 °C revealed that intergranular corrosion occurred only in the specimen annealed at 600 °C, which exhibited a higher concentration of phosphorous segregation at the GBs. This suggests that intergranular corrosion resistance deteriorates with increased phosphorous segregation at GBs. Additionally, the progression of intergranular corrosion was found to depend on GB misorientations, increasing up to 30° and stabilizing at higher GB misorientation angles. Carbon segregation was observed only in the specimen annealed at 500 °C, which showed no intergranular corrosion, despite having the highest concentration of phosphorus at the GBs. This indicates that carbon, identified as an impurity in the alloy, can inhibit intergranular corrosion induced by high phosphorous concentration at the GBs. This study provides insights into preventing the macroscopic intergranular corrosion in iron alloys by controlling the elemental segregation of impurities at GBs.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Effect of Cr Segregation on Grain Growth in Nanocrystalline α-Fe Alloy: A Multiscale Modelling Approach

Sandip Guin,Albert Linda,Yu-Chieh Lo,Somanth Bhowmick,Rajdip Mukherjee

2024-06-13

Abstract:We present a multiscale modelling framework that integrates density functional theory (DFT) with a phase-field model (PFM) to explore the intricate dynamics of grain growth in nanocrystalline {\alpha}-Fe single-phase alloy in the presence of chromium (Cr) segregation. We begin our study by validating our simulation results for equilibrium segregation in stationary GB with Mclean isotherm. Polycrystal simulations featuring nanocrystalline grains at different temperatures reveal that the grain growth kinetics depends on the ratio of Cr diffusivity to intrinsic GB mobility. In the absence of segregation, the relationship between the square of average grain size (d 2 ) and time (t) demonstrates a linear correlation. We observe that the d 2 vs. t plot exhibits a consistent linear trend up to a threshold grain size, independent of Cr segregation at GB. However, when Cr is segregated at GB, a deviation from this linear trend with a decreasing slope is evident within the temperature range of 700K to 900K beyond the threshold size. This threshold grain size decreases with increasing temperature. Notably, at 1000K, the deviation from the linear trend is observed from the initial stages of grain growth with segregation, albeit with a linear trend exhibiting a smaller slope. We also present an analytical formulation based on Cahn solute drag theory to predict grain growth behaviour in the presence of solute segregation and our simulation results well aligned this analytical formulation.

Materials Science
Measurements of angular distributions of sputtered material as a new tool for surface-segregation studies: Segregation in CuPt alloys

H.H. Andersen,V. Chernysh,B. Stenum,T. Sørensen,H.J. Whitlow

DOI: https://doi.org/10.1016/0039-6028(82)90127-3

IF: 1.9

1982-12-01

Surface Science

Abstract:The angular distribution of copper and platinum sputtered by argon ions from polycrystalline CuPt targets at 77 K has been measured by a collection technique. The argon-ion energy has been varied from 1.25 to 320 keV. For bombardment energies above 20 keV, differences in the angular distributions for the two elements indicate a strong copper segregation to the surface during bombardment.

chemistry, physical,physics, condensed matter
Kinetic Monte Carlo simulation of surface segregation in Pd–Cu alloys

feng cheng,xiang he,zhaoxu chen,yugai huang

DOI: https://doi.org/10.1016/j.jallcom.2015.05.286

IF: 6.2

2015-01-01

Journal of Alloys and Compounds

Abstract:The knowledge of surface composition and atomic arrangement is prerequisite for understanding of catalytic properties of an alloy catalyst. Gaining such knowledge is rather difficult, especially for those possessing surface segregation. Pd-Cu alloy is used in many fields and possesses surface segregation. In this paper kinetic Monte Carlo method is used to explore the surface composition and structure and to examine the effects of bulk composition and temperature on the surface segregation of Pd-Cu alloys. It is shown that the segregation basically completes within 900 s at 500 K. Below 900 K and within 20 min the enriched surface Cu atoms mainly come from the top five layers. For the first time we demonstrate that there exists a "bulk-inside flocking" or clustering phenomenon (the same component element congregates in bulk) in Pd-Cu alloys. Our results indicate that for alloys with higher Cu content there are small Pd ensembles like monomers, dimers and trimers with contiguous subsurface Pd atoms. (C) 2015 Elsevier B.V. All rights reserved.
Phase Field Simulation of Grain Boundary Segregation and Radiation-Enhanced Segregation in Fe-Cr Alloys

Yang Zhao-Xi,Liu Wen-Bo,Zhang Cong-Yu,He Xin-Fu,Sun Zheng-Yang,Jia Li-Xia,Shi Tian-Tian,Yun Di

DOI: https://doi.org/10.7498/aps.70.20201840

IF: 0.906

2021-01-01

Acta Physica Sinica

Abstract:Ferritic/martensitic steel, with Cr atomic content in a range of 7%–15%, is a promising candidate for advanced nuclear power systems, due to its swelling resistance and creep fracture resistance under irradiation. Under thermodynamic conditions, Cr segregation usually occurs at grain boundary (GB) in Fe-Cr alloys. However, irradiation can greatly accelerate this process. The enrichment of Cr at GB will enhance precipitation, resulting in embrittlement; while the depletion of Cr at GB may greatly weaken the corrosion resistance properties. In the present work, thermodynamic segregation and radiation-enhanced segregation of Cr element at GB in Fe-Cr alloy is investigated by using the Wheeler-Boettinger-McFadden (WBM) phase-field model. The simulation results show that temperature has a great influence during thermodynamic segregation of Cr at the GB without radiation: when the temperature is lower than 500 ℃ the segregation amount of Cr at the GB is relatively small; when the temperature is higher than 500 ℃ the Cr concentration at GB increases significantly. In addition, as the concentration of Cr in the matrix increases, the amount of relative increase of Cr concentration at GB decreases. However, the Cr concentration at GB under irradiation is significantly enhanced, compared with the counterpart without irradiation. With the increase of dose rate, the Cr concentration in the center of GB also increases. Moreover, with the increase of Cr concentration in the matrix, the relative increase of the Cr concentration at the GB weakens.
Segregation Effect on Surface Composition in Alloy Sputtering

LP ZHENG,RS LI,MY LI,FZ CUI

DOI: https://doi.org/10.1088/0256-307x/7/3/012

1990-01-01

Abstract:The modified dynamic TCIS (Transport and atomic Collision cascade of energetic Ions in Solids) Monte Carlo program including the radiation-enhanced Gibbsian segregation (REGS) is employed to estimate the compositional distributions at surface of the Au0.56Cu0.44 alloy under 2ke V Ar+ ion bombardment at high dose. The calculation results exhibit that the Au composition enriches in the first layer (74 at.%), depletes in the second layer (37 at.%) and gradually rises with depth to the bulk composition. The effect of the relation between sputter depth and segregation layer on the surface concentration of Au0.56Cu0.44 is also discussed.
Formation of Pd Monomers and Dimers on A Single-Crystal Pd3fe(111) Surface

Xiaofang Yang,Jun Hu,Ruqian Wu,Bruce E. Koel

DOI: https://doi.org/10.1021/jz100769b

2010-01-01

Abstract:Surface reconstruction of binary alloys is important in heterogeneous 'catalysis because it modifies both surface composition and structure and thus affects the catalytic activity and selectivity We report here on segregation and surface morphology at a Pd3Fe(111) single-crystal model catalyst investigated by " low-energy ion scattering (LEIS) and scanning tunneling microscopy (STM). Annealing in vacuum causes Pd segregation, and STM reveals a complex surface structure with 0 17 monolayers of Pd monomer and dimer adatoms on top.of the outermost alloy layer. This result is explained by density functional theory (DFT) calculations, which reveal that the contribution from vibrational free energy causes Pd atoms to detach from step edges at high temperature ( > 1200 K) and then become trapped at room temperature at Fe defect sites due to a large diffusion " barrier This adlayer structure differs from surface structures observed for other " binary alloy systems and is likely to offer new opportunities for manipulating catalytic properties of bimetallic alloys SECTION Surfaces, Interfaces. Catalysis
Chromium agglomeration induced by Fe + ion irradiation of Fe-10at%Cr

S. Pantousa,A.J. London,K. Mergia,A. Ionescu,E. Manios,P. Tsavalas,S. Dellis,C. Kinane,S. Langridge,A. Caruana,U. Kentsch,S. Messoloras

DOI: https://doi.org/10.1016/j.nme.2024.101680

IF: 3.037

2024-05-24

Nuclear Materials and Energy

Abstract:Fe-Cr alloys serve as model alloys for the investigation of radiation induced effects in ferritic-martensitic steels which are candidate structural materials for future fusion reactors. In this work the effect of Cr segregation and/or agglomeration in 490 keV Fe + ion irradiated Fe-10at%Cr alloys in the form of thin films is investigated. The irradiations took place at 300 °C at doses ranging from 0.5 to 20 displacements per atom (dpa). Polarized Neutron Reflectivity (PNR) measurements was used for the determination of the solute Cr concentration in the Fe-Cr matrix. Cr depletion from the Fe-Cr matrix up to 2.4 at% was found. This is related to solute Cr decrement as the accumulated dose increases. After the damage of 4 dpa, solute Cr reaches the asymptotic value of 8.4 at%, close to that of the thermodynamic equilibrium in Fe-Cr. Atom Probe Tomography (APT) measurements showed that after irradiation Cr accumulates into clusters the majority of which is co-located with oxygen.

nuclear science & technology

Surface Segregation in an FeCrP Alloy

Understanding the surface segregation behavior of transition metals on Ni(111): a first-principles study.

Equilibrium segregation of phosphorus at grain boundaries of Fe–P, Fe–C–P, Fe–Cr–P, and Fe–Cr–C–P alloys

Investigation of Surface Segregation in Fe-Cr-Si Alloys by XPS

Segregation, precipitation, and α-α' phase separation in Fe-Cr alloys: a multi-scale modelling approach

Effect of surface hydrogen on the anomalous surface segregation behavior of Cr in Fe-rich Fe-Cr alloys

Anomalous Surface Segregation Profiles in Ferritic FeCr Stainless Steel

First‐principles Study of Surface Segregation in Bimetallic Ni3M (M = Mo, Co, Fe) Alloys with Chemisorbed Atomic Oxygen

First-principles Investigation into the Effect of Cr on the Segregation of Multi-H at the Fe Σ3 (111) Grain Boundary

Interfacial Segregation and Precipitates Behavior in the Ultrafine Grained Al-based Metal Matrix Composites

Grain Boundary Specific Segregation in Nanocrystalline Fe(Cr)

Surface segregation of PdM (M=Cu, Ag, Au) alloys and its implication to acetylene hydrogenation, DFT-based Monte Carlo simulations

Surface parameters of ferritic iron-rich Fe-Cr alloy

Grain boundary nanochemistry and intergranular corrosion of Fe-0.01wt.%P alloy: Roles of elemental segregations and misorientation

Effect of Cr Segregation on Grain Growth in Nanocrystalline α-Fe Alloy: A Multiscale Modelling Approach

Measurements of angular distributions of sputtered material as a new tool for surface-segregation studies: Segregation in CuPt alloys

Kinetic Monte Carlo simulation of surface segregation in Pd–Cu alloys

Phase Field Simulation of Grain Boundary Segregation and Radiation-Enhanced Segregation in Fe-Cr Alloys

Segregation Effect on Surface Composition in Alloy Sputtering

Formation of Pd Monomers and Dimers on A Single-Crystal Pd3fe(111) Surface

Chromium agglomeration induced by Fe + ion irradiation of Fe-10at%Cr