Abstract:The partial substitution of M (M = Cu, Co, Mn) for Ni has been performed in order to ameliorate the electrochemical hydrogen storage performances of Mg2Ni-type electrode alloys. The melt spinning technology was used to prepare the Mg20Ni10-xMx (M = None, Cu, Co, Mn; x = 0, 4) electrode alloys. The impacts of the melt spinning and the M (M = Cu, Co, Mn) substitution on the structures and electrochemical hydrogen storage characteristics of the alloys were investigated systemically. The analysis of XRD and TEM reveals that the as-spun (M = None, Cu) alloys display an entire nanocrystalline structure, whereas the as-spun (M = Co, Mn) alloys hold a nanocrystalline/amorphous structure, indicating that the substitution of M (M = Co, Mn) for Ni facilitates the glass formation in the Mg2Ni-type alloys. Besides, all the as-cast alloys have a major phase Mg2Ni, whereas the M (M = Co, Mn) substitution brings on the formation of some secondary phases, MgCo2 and Mg for the (M = Co) alloy, and MnNi and Mg for the (M = Mn) alloy. Based upon the electrochemical measurements, an evident impact engendered by melt spinning on the electrochemical performances of the alloys appears. The cycle stability of the alloys augments monotonously with the growing of the spinning rate. The discharge capacity and high rate discharge ability (HRD), however, act differently. Melt spinning enhances the cycle stability of the (M = Co, Mn) alloys dramatically, but exerts an adverse impact on the (M = None, Cu) alloys. The high rate discharge ability (HRD) of all the alloys grow considerably with the rising of the spinning rate except for (M = Mn) alloy, whose HRD has a maximum value with the variation of the spinning rate. Furthermore, the substitution of M (M = Cu, Co, Mn) for Ni enhances the electrochemical performances of the as-cast and spun Mg 2Ni alloys evidently, but the M (M = Mn) substitution gives rise to a decline of HRD when the spinning rate reaches 20 m/s. © 2012 Elsevier B.V. All rights reserved.

The Effects of Partial Substitution of Fe and Co for Ni in the Mg1.75Al0.25Ni Electrode Alloy on Electrochemical Performances

The effect of partial substitution of Ti with Zr, Cr or V in the Mg35Ti10Ni55 electrode alloy on its electrochemical performance

Effect of Co Substitution for Ni on the Structural and Electrochemical Properties of La2Mg(Ni1−xCox)9 (x = 0.1–0.5) Hydrogen Storage Electrode Alloys

A study on the structure and electrochemical properties of La 2Mg(Ni0.95M0.05)9 (M = Co, Mn, Fe, Al, Cu, Sn) hydrogen storage electrode alloys

The Reduction of Cycling Capacity Degradation of Mg–Ni-based Electrode Alloys by Fe Substitution

Influence of the material processing on the electrochemical properties of cobalt-free Ml(NiMnAlFe)5 alloy

The structural and electrochemical properties of La2Mg(Ni0.8-xCo0.2Alx)9 (x = 0-0.03) hydrogen storage electrode alloys

The correlative effects of Al and Co on the structure and electrochemical properties of a La–Mg–Ni-based hydrogen storage electrode alloy

The Effects of Partial Substitution of Mn by Cr on the Electrochemical Cycle Life of Ti-Zr-V-Mn-Ni Alloy Electrodes of a Ni/MH Battery

Electrode Characteristics of Non-Stoichiometric Ml(Nimnalfe)(X) Alloys

Electrochemical Performance of the Ball-Milled La2Mg14−xTixNi3 Alloys with Ni Powders (x=1 and 2)

An Improvement on Cycling Stability of Ti–V–Fe-based Hydrogen Storage Alloys with Co Substitution for Ni

The effect of partial substitution of Zr for Ti on the electrochemical properties and surface passivation film of Mg35Ti10 - xZrxNi55 (x=1, 3, 5, 7, 9) electrode alloys

Electrochemical properties of amorphous Mg–Fe alloys mixed with Ni prepared by ball-milling

The Effect Of Al Substitution For Ni On The Structure And Electrochemical Properties Of Ab(3)-Type La2mg(Ni1-Xalx)(9) (X=0-0.05) Alloys

Investigation on the Characteristics of La0.7Mg0.3Ni2.65Mn0.1Co0.75+x (x = 0.00–0.85) Metal Hydride Electrode Alloys for Ni/MH Batteries Part II: Electrochemical Performances

Physicochemical Properties And Electrochemical Performance Of Al-Substituted Alpha-Ni-(Oh)(2) With Additives For Ni-Metal Hydride Batteries

Comparative study of electrochemical performances of the as-melt Mg 20Ni10-xMx (M = None, Cu, Co, Mn; X = 0, 4) alloys applied to Ni/metal hydride (MH) battery

Function of Al on the Cycling Behavior of the La–Mg–Ni–Co-type Alloy Electrodes

Effects of Molybdenum Substitution on the Electrochemical Properties of La 2 MgNi 8− X CoMo X Alloys

Electrochemical studies on La0.7Mg0.3Ni 3.4-xCo0.6Mnx metal hydride electrode alloys