Abstract:Three-dimensional (3-D) open-channeled scaffolds of biopolymers are a promising candidate matrix for tissue engineering. When scaffolds have the capacity to deliver bioactive molecules the potential for tissue regeneration should be greatly enhanced. In order to improve drug-delivery capacity, we exploit 3-D poly(lactic acid) (PLA) scaffolds by creating microporosity within the scaffold network. Macroporous channeled PLA with a controlled pore configuration was obtained by a robotic dispensing technique. In particular, a room temperature ionic liquid (RTIL) bearing hydrophilic counter-anions, such as OTf and Cl, was introduced to the biopolymer solution at varying ratios. The RTIL-biopolymer slurry was homogenized by ultrasonication, and then solidified through the robotic dispensing process, during which the biopolymer and RTIL formed a bicontinuous interpenetrating network. After ethanol wash-out treatment the RTIL was completely removed to leave highly microporous open channels throughout the PLA network. The resultant pore size was observed to be a few micrometers (average 2.43 μm) and microporosity was determined to be ∼ 70%. The microporous surface was also shown to favor initial cell adhesion, stimulating cell anchorage on the microporous structure. Furthermore, in vivo tissue responses assessed in rat subcutaneous tissue revealed good tissue compatibility, with minimal inflammatory reactions, while gathering a larger population of fibroblastic cells than the non-microporous scaffolds, and even facilitating invasion of the cells within the microporous structure. The efficacy of the micropore networks generated within the 3-D scaffolds in loading and releasing therapeutic molecules was addressed using antibiotic sodium ampicillin and protein cytochrome C as model drugs. The microporous scaffolds exhibited significantly enhanced drug loading capacity: 4-5 times increase in ampicillin and 9-10 times increase in cytochrome C compared to the non-microporous scaffolds. The release of ampicillin loaded within the microporous scaffolds was initially fast (∼ 85% for 1 week), and was then slowed down, showing a continual release up to a month. On the other hand, cytochrome C was shown to release in a highly sustainable manner over a month, without showing an initial burst release effect. This study provides a novel insight into the generation of 3-D biopolymer scaffolds with high performance in loading and delivery of biomolecules, facilitated by the creation of microporous channels through the scaffold network. The capacity to support tissue cells while in situ delivering drug molecules makes the current scaffolds potentially useful for therapeutic tissue engineering.

Highly Porous Crosslinkable PLA‐PNB Block Copolymer Scaffolds

Synthesis Of Polypeptoid-Polycaprolactone-Polytetrahydrofuran Heterograft Molecular Polymer Brushes Via A Combination Of Janus Polymerization And Romp

Microfabrication of 3D-Polymeric Structures Using Soft Lithography for Tissue Engineering

Surface Modification of Biodegradable Polymer/TCP Scaffolds and Related Research

In Situ Synthesis of Polyurethane Scaffolds with Tunable Properties by Controlled Crosslinking of Tri-Block Copolymer and Polycaprolactone Triol for Tissue Regeneration

Particle-collision and Porogen-Leaching Technique to Fabricate Polymeric Porous Scaffolds with Microscale Roughness of Interior Surfaces

Fabrication of three dimensional polymeric scaffolds with spherical pores

Photothermal Sensitive 3D Printed Biodegradable Polyester Scaffolds with Polydopamine Coating for Bone Tissue Engineering

Microporous/Macroporous Polycaprolactone Scaffolds for Dental Applications

Biodegradable Polylactic Acid (PLA) Microstructures for Scaffold Applications

Synergistic fabrication of micro-nano bioactive ceramic-optimized polymer scaffolds for bone tissue engineering by in situ hydrothermal deposition and selective laser sintering

A Novel Poly (Lactic-Co-Glycolic Acid)-Collagen Hybrid Scaffold Fabricated Via Multi-Nozzle Low-Temperature Deposition

Advanced Bioresin Formulation for 3D-Printed Bone Scaffolds: PCLDMA and p-PLA Integration

Structural mechanics of 3D-printed poly(lactic acid) scaffolds with tetragonal, hexagonal and wheel-like designs.

A facile approach to fabricate load-bearing porous polymer scaffolds for bone tissue engineering

A Multimaterial Scaffold With Tunable Properties: Toward Bone Tissue Repair

Confined Water Dynamics in the Scaffolds of Polylactic Acid

Porous polymeric structures for tissue engineering prepared by a coagulation, compression moulding and salt leaching technique

Macroporous and nanofibrous poly(lactide-co-glycolide)(50/50) scaffolds via phase separation combined with particle-leaching

Biocompatibility and Physico-Chemical Properties of Highly Porous PLA/HA Scaffolds for Bone Reconstruction

A novel therapeutic design of microporous-structured biopolymer scaffolds for drug loading and delivery