Abstract:We describe a quasi-distributed optical fiber strain sensor, whose principle of operation is based on the coherent frequency-modulated continuous-wave (FMCW) reflectometry technique. The sensing system is basically composed of a laser diode, which is frequency swept by a triangle waveform injection current and an unbalanced two-beam interferometer. Its test arm consists of a number of single-mode fibers, which act as sensing fibers, with a mirror at the far end and mechanical splices as the connectors as well as the reflectors. Theoretical analysis shows that the measuring resolution of the strain is inversely proportional to the length of the sensing fiber. To measure the strain variation of each sensing fiber, the phase shifts of the beat signals are demodulated by a heterodyne signal processing system. The requirement of a high precision temperature control of light source can be eliminated in this way, since temperature effect is insignificant to the phase demodulation technique. To calibrate and verify the linearity, feasibility, and accuracy of this system, tensile and bending tests were carried out and strain gauge was employed as the benchmarking tool over the experimental results. It was observed that this system is feasible and its accuracy is excellent. © 2002 Society of Photo-Optical Instrumentation Engineers.

Novel Distributed Fiber-Optic Strain Sensor by Localizing Dynamic Grating in Polarization-Maintaining Erbium-Doped Fiber: Proposal and Theoretical Analysis

Distributed Fiber Optic Strain Sensing by Synthesizing Dynamic Grating in Polarization-Maintaining Erbium-Doped Fiber

A fiber Bragg grating interrogating dynamic strains sensor system based on interference of polarized mode

Dynamic gratings in optical fibers: Synthesis and sensing applications

Distributed strain interrogation with a linearly chirped fiber Bragg grating based on an optoelectronic oscillator

A Simple Strain Sensor Using Polymer Fiber Bragg Grating and Long-Period Fiber Grating

Quasi-distributed frequency-modulated continuous-wave reflectometric optical fiber strain sensor

Distributed Fiber Strain and Vibration Sensor Based on Brillouin Optical Time-Domain Reflectometry and Polarization Optical Time-Domain Reflectometry.

High-speed Quasi-Distributed Strain Sensing Based on Time Division Multiplexing of Fibre Bragg Gratings

Strain-insensitive temperature sensing with a dual polarization fiber grating laser

Temperature-Insensitive Strain Sensing with a Polarization-Maintaining Photonic Crystal Fiber Based on Brillouin Dynamic Grating

Temperature Insensitive Distributed Wide-dynamic-range Strain Sensing based on Polarization-Maintaining Photonic Crystal Fiber

High Spatial Resolution Fiber-Optic Distributed Lateral-Stress Sensing by Stepwise Frequency Modulation of a Super Structure Grating Distributed Bragg Reflector Laser Diode

Distributed Brillouin Optical Fiber Sensing for Dynamic Strain with Frequency Agility Based on Dual-Modulation

One-laser-based Generation/detection of Brillouin Dynamic Grating and Its Application to Distributed Discrimination of Strain and Temperature

A Strain Sensing System Based on the Novel Long-period Fiber Grating

All-Fiber Strain Sensor Based on Dual Side V-Grooved Long-Period Fiber Grating

A High Performance Distributed Optical Fiber Sensor Based on Φ-OTDR for Dynamic Strain Measurement

Mathematical Modeling of π-Phase-Shifted Fiber Bragg Grating and its Application for Strain Measurement in Epoxy Resin Cantilever Beam

Temperature self-compensation strain sensor based on cascaded concave-lens-like long-period fiber gratings

Nonlinear Fiber-Optic Strain Sensor Based on Four-Wave Mixing in Microstructured Optical Fiber