Abstract:Abstract LiMn 1‐y Fe y PO 4 (LMFP) is a significant and cost‐effective cathode material for Li‐ion batteries, with a higher working voltage than LiFePO 4 (LFP) and improved safety features compared to layered oxide cathodes. However, its commercial application faces challenges due to a need for a synthesis process to overcome the low Li‐ion diffusion kinetics and complex phase transitions. Herein, a solid‐state synthesis process using LFP and nano LiMn 0.7 Fe 0.3 PO 4 (MF73) is proposed. The larger LFP acts as a structural framework fused with nano‐MF73, preserving the morphology and high performance of LFP. These results demonstrate that the solid‐state reaction occurs quickly, even at a low sintering temperature of 500 °C, and completes at 700 °C. However, contrary to the expectations, the larger LFP particles disappeared and fused into the nano‐MF73 particles, revealing that Fe ions diffuse more easily than Mn ions in the olivine framework. This discovery provides valuable insights into understanding ion diffusion in LMFP. Notably, the obtained LMFP can still deliver an initial capacity of 142.3 mAh g −1 , and the phase separation during the electrochemical process is significantly suppressed, resulting in good cycling stability (91.1% capacity retention after 300 cycles). These findings offer a promising approach for synthesizing LMFP with improved performance and stability.

A 3.9 V polyanion-type cathode material for Li-ion batteries

Ordered LiNi0.5Mn1.5O4 Cathode in Bis(fluorosulfonyl)imide-Based Ionic Liquid Electrolyte: Importance of the Cathode-Electrolyte Interphase

A Novel Synthesis and Characterization of LiFePO4 and LiFePO4/C As a Cathode Material for Lithium-Ion Battery

Nanostructured 0.8Li 2FeSiO 4/0.4Li 2SiO 3/C composite cathode material with enhanced electrochemical performance for lithium-ion batteries

Cation Mixing (Li0.5fe0.5)(2)So4f Cathode Material For Lithium-Ion Batteries

Synthesis and electrochemical characterization of LiFePO4/C Cathode materials for Li-ion batteries

Synthesis And Electrochemical Properties Of Li2fesio4/C As Cathode Materials For Lithium-Ion Batteries

Cation mixing (Li <sub>0.5</sub> Fe <sub>0.5</sub> ) <sub>2</sub> SO <sub>4</sub> F cathode material for lithium-ion batteries

Synthesis, characterization and properties of LiFePO4/C cathode material

Li<sub>0.99</sub>Ti<sub>0.01</sub>FePO<sub>4</sub>/C composite as cathode material for lithium ion battery

A Promising Solid‐State Synthesis of LiMn 1‐ y Fe y PO 4 Cathode for Lithium‐ion Batteries

LiFe(MoO4)2 as a novel anode material for lithium-ion batteries.

Li 0.99 Ti 0.01 FePO 4 /C composite as cathode material for lithium ion battery

Synthesis and characterization of Li(Li0.23Mn 0.47Fe0.2Ni0.1)O2 cathode material for Li-ion batteries

A Novel Synthesis Route for LiFePO[sub 4]/C Cathode Materials for Lithium-Ion Batteries

e nano-sized LiMn 1 x Fe x PO 4 cathode materials for advanced lithium-ion batteries †

Monoclinic Phase Na3Fe2(PO4)3: Synthesis, Structure, and Electrochemical Performance as Cathode Material in Sodium-Ion Batteries

Mixed-polyanion LiV(SixP1−xO4)F/C (0 < X < 1) Cathode Materials for Lithium Ion Batteries

A 3.90 V iron-based fluorosulphate material for lithium-ion batteries crystallizing in the triplite structure

Y3+ doping and electrochemical properties of LiFe0.5Mn0.5PO4@C cathode material for lithium-ion batteries

Li2fesio4/C with Good Performance As Cathode Material for Li-Ion Battery