Abstract:Improving the efficiency of energy system is a way to reduce its environmental impact. However, high efficiency always means high system complexity and high expense, and will again increase the environmental impact. This work proposed an exergy-environment assessment method for energy system. With the exergy balance calculation, the method converted the internal and total exergy loss flows, as well as the life-cycle consumed material (including utility), to the values of environmental impact points. This work also proposed indexes to assess whether the energy transformation (exergy loss) or the life-cycle consumption dominates the environmental impact. Then, this work adopted a sludge digestion system to show the application of the proposed method. The exergy analysis and environmental impact points of the system were calculated. The entire system has a positive exergy output of digestion gas (4.18 GJ h−1). The objective exergy efficiency of system is 27.11%, and the general exergy efficiency of digester unit (80.10%) is over two times that of heating unit (35.00%). Heating unit also has a much higher environmental impact than digester unit (about 1.00: 0.15). Results show that the exergy-environment assessment does not breach the classical thermodynamic analysis and provides the understanding of environmental impact. Compared to previous studies, this work resolves the issue of unreasonable data for the exergy-environment impact factor in methodology by amending its value from <0 or ≈0 to 0.40, clarifying the significance and rationality of exergy-environment assessment. The case study result shows the feasibility and advantage of the proposed method, which can be flexibly selected by decision maker. Impact factor based on the internal exergy loss is relatively preferred from the perspective of sustainability.

Modular based exergy loss analysis for chemical processes

Optimal Process Design for Recovering Effluent Gas at Subambient Temperature

Thermodynamic optimization analysis of a tube-in-tube helically coiled heat exchanger for Joule-Thomson refrigerators

Efficient Strategy for the Synthesis of Work and Heat Exchange Networks

Process modelling, optimisation and analysis of heat recovery energy system for petrochemical industry

Process Modeling and Exergy Analysis for a Typical VOC Thermal Conversion Plant

Systematic Optimization Methodology for Simultaneous Process Design and Heat Exchanger Network Synthesis with Surrogate Models – Application to Distillation Column Complex

Optimization of Heat Recovery Networks for Energy Savings in Industrial Processes

Enhanced exergy analysis of the modified condensate gas treatment process

Complete Equation-Oriented Approach for Process Analysis and Optimization of A Cryogenic Air Separation Unit

A 4E Analysis of a Novel Coupling Process of Syngas Purification and CO2 Capture, Transcritical CO2 Power and Absorption Refrigeration

A Modified Exergy Analysis Method for Vapor Compression Systems: Splitting Refrigerant Exergy Destruction

Exergy-environment assessment for energy system: Distinguish the internal and total exergy loss, and modify the contribution of utility

Thermodynamic Modeling and Multi‐Objective Optimization of a New System Presented for Reutilization of the Lost Heat in Combined‐Cycle Power plants

Process optimization, exergy and economic analysis of boil-off gas re-liquefaction processes for LNG carriers

Exergy Analysis of Coal-Based Series Polygeneration Systems for Methanol and Electricity Co-Production

Energy efficiency analysis of coal-to-ethylene glycol distillation process based on exergy analysis

An Exergy Analysis Model for the Optimal Operation of Integrated Heat-and-Electricity-Based Energy Systems

Simulation and optimization of DMC synthesis process based on conventional and advanced exergy analyses

Exergy Analysis and Advanced Exergy Analysis of a Novel Power/Refrigeration Cascade System for Recovering Low-Grade Waste Heat at 90–150 °C

A simultaneous optimization model for a heat-integrated syngas-to-methanol process with Kalina Cycle for waste heat recovery