Abstract:Cobalt-free oxide Sr0.7Y0.3CuO2+delta (SYCu) with one-dimensional structure has been investigated as potential cathode material for intermediate temperature solid oxide fuel cell (IT-SOFC) applications. The crystal structure, chemical compatibility, thermal expansion and electrochemical performance were examined by X-ray diffraction technique, electrochemical workstation and thermal dilatometer. One-dimensional structure Sr1-xYxCuO2+delta and Sr2-xYxCuO3+delta phases appeared as the main parts after calcination above 900 degrees C. The copper based oxide SYCu showed a thermal expansion coefficient (TEC) about 11.1 x 10(-6)/degrees C at 25-800 degrees C, exhibiting good physical compatibility with samarium doped cerium (SDC) electrolyte. High electro-catalytic performance was obtained for SYCu cathode in a symmetrical cell with a polarization resistance (R-p) of 0.029 Omega cm(2) and an overpotential of 4.9 mV at 100 mA/cm(2) at 800 degrees C, showing great promising use as cathode materials for IT-SOFCs. In addition, the polarization resistance of SYCu cathode remain constant after operation at 800 degrees C for 100 h, showing excellent long-term stability at operation temperature. Copyright (C) 2013, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

ChemInform Abstract: Characterization of GdBaCo2O5+δ Cathode for IT‐SOFCs.

Characterization of GdBaCo2O5+δ cathode for IT-SOFCs

Nanosized Ceria Modified GdBaCo2O5+δ Cathode for IT-SOFC

GdBaCo2O5+δ–Sm0.2Ce0.8O1.9 Composite Cathodes for Intermediate Temperature SOFCs

ChemInform Abstract: Progress in Understanding and Development of Ba0.5Sr0.5Co0.8Fe0.2 O3‐δ‐Based Cathodes for Intermediate‐Temperature Solid‐Oxide Fuel Cells: A Review

GdBaCo(2)O(5+delta)-Sm(0.2)Ce(0.8)O(1.9) Composite Cathodes for Intermediate Temperature SOFCs

A Study of (ba0.5sr0.5)1−xsmxco0.8fe0.2o3−δ As a Cathode Material for IT-SOFCs

Cobalt-free Sr0.7Y0.3CuO2+δ As a Cathode for Intermediate-Temperature Solid Oxide Fuel Cell

Preparation, Characterization, and Electrochemical Properties of YBaCo3.4Al0.3Ga0.3O7+δ and YBaCo3.2Al0.4Ga0.4O7+δ Cathodes for IT-SOFCs

PREPARATION AND CHARACTERIZATION OF Gd_(1-x)Sr_xCoO_(3-δ) AS INTERMEDIATE TEMPERATURE SOLID OXIDE FUEL CELL CATHODE MATERIAL

Enhanced performance of the GdBaCo2O5+δ cathode with active Ce0.8Sm0.2O1.9 nanoparticles

Significantly Enhanced Performance of the GdBaCo2O5+δ Cathodes with Active Ce0.8Sm0.2O1.9 Nanoparticles

Preparation and characterization of Gd1-xSrxCoO 3-δ and Gd0.8Sr0.2Co1-yFe yO3-δ

Thermal Expansion and Electrochemical Properties of Ni-doped GdBaCo2O5+δ Double-Perovskite Type Oxides

Compaction Pressure Effect on Microstructure and Electrochemical Performance of GdBaCo2O5+δ Cathode for IT-SOFCs

Unveiling the Electrocatalytic Activity of the GdBa 0.5 Sr 0.5 Co 2- x Cu x O 5+δ ( x ≥ 1) Oxygen Electrodes for Solid Oxide Cells

Preparation and Performance of SrCo1-xGaxO3-δ Cathode Materials for Interme-diate Temperature Solid Oxide Fuel Cells

BaCo<sub>1‐x</sub>NbxO<sub>3−δ</sub> as a Promising Cathode for Intermediate Temperature Solid Oxide Fuel Cells

Functionally Graded Cathodes Based on Double Perovskite Type GdBaCo2O5+δ Oxide

Preparation and Performance of Srco1-Xgaxo3-Delta Cathode Materials for Intermediate Temperature Solid Oxide Fuel Cells

Preparation and Performance of SrCo_(1-x)Ga_xO_(3-δ)Cathode Materials for Intermediate Temperature Solid Oxide Fuel Cells