Abstract:Corrosion of metallic structures widely existed in multiple industries, such as oil and gas, civil infrastructure, aerospace, mechanical, mining, and processing. Current available corrosion-monitoring methods are based on different sensing principles, which have their own advantages, and some drawbacks that may limit their application on some aspects. This article presents an electromechanical impedance-instrumented corrosion-measuring probe for corrosion monitoring. The proposed probe is fabricated by attaching a circular lead zirconate titanate patch onto a metal rod. Compared to other electromechanical impedance-based corrosion-monitoring methods, the probe is capable of isolating the influence of structural complexity, variations in loading and boundary conditions. Five probes were fabricated in the experimental study and three of them were subjected to accelerated corrosion tests to mimic the corrosion-induced mass loss damage. Results showed that the peak magnitude of the conductance signatures was reduced with the increase in corrosion amount. The variations in the conductance signatures were quantified by three statistical quantifying metrics, that is, root-mean-square deviation, mean absolute percentage deviation, and correlation coefficient deviation. All these metrics increase with the increase in corrosion amount, which can be used as an indicator of the corrosion process. This study proves that the proposed corrosion-measuring probe is effective in monitoring corrosion and shows promising application potential. This research also serves as a proof-of-concept study to demonstrate the capability of the electromechanical impedance technique in monitoring mass loss due to corrosion.

STUDY ON PRINCIPLE OF ELECTRICAL RESISTANCE PROBE BASED ON-TEMPERATURE COMPENSATION FOR CORROSION MONITORING

THE CORROSION MONITORING USING RESISTANCE-PROBE METHOD IN THE CEMENT MOTAR AND COMPARING WITH ELECTROCHEMISTRY-PROBE METHOD

Lead-Wire-Resistance Compensation Technique Using A Single Zener Diode For Two-Wire Resistance Temperature Detectors (Rtds)

Research and Development of Corrosion Monitoring Sensor for Bridge Cable Using Electrical Resistance Probes Technique

An Electromechanical Impedance-Instrumented Corrosion-Measuring Probe

Monitoring Of Rebar Corrosion By Means Of The Electrical Resistance Probes

Study on the Real-Time Dynamic Monitoring of Corrosion Rate of Reinforcement in Carbonation Environment

A New Corrosion Sensor To Determine The Start And Development Of Embedded Rebar Corrosion Process At Coastal Concrete

Numerical Simulation of a Magnetic Corrosion Detector for Corrosion Detection of Steel Rebar in Concrete

Performance study of novel metal corrosion probes based on the adjust method of series and parallel connections

Experimental Study on Pipeline Internal Corrosion Based on A New Kind of Electrical Resistance Sensor

Probing and separating corrosion and erosion of pipeline steel using electrical resistance method in conjunction with electrochemical measurements

The Compensation Method Study of Dielectric Loss Measurement Sensor

MARINE ATMOSPHERIC CORROSION MONITORING BY MEANS OF AC IMPEDANCE TECHNIQUE

A novel single-electrode AC probe for rapid monitoring of both instantaneous and accumulated electrochemical parameters in corrosion

Comparative Investigation on Copper Atmospheric Corrosion by Electrochemical Impedance and Electrical Resistance Sensors

Temperature drift error compensation of wireless strain acquisition node

EMI Instrumented Conical Corrosion Measuring Probe for Pipeline Corrosion Monitoring: Experiments with FEM Validation

Corrosion Rate Measuring Instrument Based on Linear Polarization Method

The study of the localized corrosion caused by mineral deposit using novel designed multi‐electrode sensor system

Research on Temperature Compensation Technology of BOTDR Strain Monitoring