Abstract:Nearly constant mean angular momentum profiles are widely observed in curved turbulent flows, including the bulk region of Taylor--Couette (TC) flows, where the inner and outer cylinders have weakly counter-rotating and co-rotating conditions. For high-Reynolds-number TC flows under these conditions, both the bulk and boundary layers become turbulent without Taylor rolls, referred to as the featureless ultimate regime (UR). In this study, we examine Reynolds-averaged Navier--Stokes (RANS) models to predict the nearly constant mean angular velocity as a one-dimensional problem in the featureless UR of TC turbulence. High-Reynolds-number experiments of TC turbulence are performed for reference, where the radius ratio is $\eta = r_\mathrm{in}/r_\mathrm{out} = 0.732$ and angular velocity ratio $a = -\omega_\mathrm{out}/\omega_\mathrm{in}$ is in the range $-0.5 \le a \le 0.1$. Verification of the RANS model using the algebraic Reynolds stress model (ARSM) suggests that convection of the Reynolds stress is essential for predicting the angular momentum profile. We introduce the Jaumann derivative as a covariant time derivative to develop ARSMs that incorporate the convection effect in a covariant manner. The proposed ARSM using the Jaumann derivative of the term composed of the strain and vorticity tensors successfully predicts the nearly constant mean angular momentum for a wide range of angular velocity ratios in the co-rotating case. The modelling approach incorporating time-derivative terms is a candidate for expressing curvature effects while satisfying the covariance of the Reynolds stress tensor.

Modelling of pressure-strain correlations for Taylor-Proudman turbulence

Modelling of turbulent flows in rotating systems with second-moment closures

Second-moment Closure Modelling of Turbulence in a Non-Inertial Frame

Revisiting the pressure-strain correlation model with the aid of the rapid distortion theory

MODELLING THE RAPID PRESSURE-STRAIN CORRELATION IN THE RAPID DISTORTION LIMIT

Modelling of Pressure–strain Correlation in Compressible Turbulent Flow

Modelling of the Pressure-Velocity Correlation in Turbulence Diffusion

Reynolds-stress Modelling of Turbulent Rotating Flows

A modified Drucker-Prager criterion for transversely isotropic geomaterials and its numerical implementation

Research of the Rapid Pressure-Strain Correlation Model in the Rapid Distortion Limit

Viscoelastic flow in rotating curved pipes

Prediction of Forced Gas Flows in Circular Tubes at High Heat Fluxes Accompanied by Laminarization

A constitutive model on flow stress prediction from the contribution of twin and grain refinement, strain and strain rate during surface mechanical attrition treatment of metals

A Note On Turbulence Modeling

Covariant algebraic Reynolds stress modelling of curvature effects in high-Reynolds-number Taylor--Couette turbulence

On taylor correlation functions in isotropic turbulent flows

A theory of turbulence mechanics based on material failure

Development of Nonlinear Eddy-Viscosity Model for Numerical Simulation of Three-Dimensional Turbulent Boundary Layer

Modelling the Compressibility Effect with Second-Moment Closure

Experimental testing of the Prandtl-Tomlinson model: Molecular origin of rotational friction

Experimental testing of the Prandtl–Tomlinson model: Molecular origin of rotational friction