Abstract:In this work, we report the fabrication process of wavy top-emission organic light-emitting diodes (WOLEDs), which can sustain multiaxial tensile and compressive strains. The devices are fabricated using standard procedures, comprised of the conventional stacks of OLED materials and transfer printing process. Transferring these devices onto thermally prestrained elastomeric substrates and then releasing this strain configure the devices into random, two-dimensional (2D) wavy layouts. The performance of the WOLEDs is analyzed at +/- 1.5% (strain ratio =1.16) and +/- 3% (strain ratio =2.33) strain with respect to the prestrain value. The fabricated WOLEDs demonstrate good performance in the green light region within +/- 1.5% and show comparable results even at +/- 3% tensile and compression strains, which indicates that the fabricated devices can accommodate high strain ratios without inducing significant stresses in the devices. Finite element simulation demonstrates strong coherence with the experimental results and provides a valuable insight into the strain effects on each layer utilized for the device fabrication. Along with that, the neutral plane is generated around the upper region of emission and cathode layers in the devices. A slight blue shift observed by the electroluminescence analysis reveals that luminescence of various colors can be obtained by changing the dimensions of the wavy buckles. This research work can remarkably contribute to the fabrication of multicolored flexible, wearable indicators or curvilinear displays that require the ability not only to bend and stretch, but also to compress in multiple directions with a high strain ratio. (C) 2017 Elsevier B.V. All rights reserved.

Light Emission Characteristics and Mechanics of Foldable Inorganic Light‐Emitting Diodes

High-Performance Light-Emitting Diodes Based on Carbene-Metal-Amides

Thermal Management for Microscale Inorganic Light-Emitting Diodes

Recent Advances in Flexible Inorganic Light Emitting Diodes: From Materials Design to Integrated Optoelectronic Platforms

Multiaxial Wavy Top-Emission Organic Light-Emitting Diodes on Thermally Prestrained Elastomeric Substrates

Recent Developments in Flexible Organic Light‐Emitting Devices

A robust vertical nanoscaffold for recyclable, paintable, and flexible light-emitting devices

Printed Assemblies of Inorganic Light-Emitting Diodes for Deformable and Semitransparent Displays

Recent development of flexible organic light emitting devices

Recent Advances in Organic Light-Emitting Diodes for Flexible Applications

Unusual Strategies For Using Indium Gallium Nitride Grown On Silicon (111) For Solid-State Lighting

Waterproof Flexible InP@ZnSeS Quantum Dot Light‐Emitting Diode

Narrow Emission from Polyimide Light-Emitting Diodes

Stretchable, Curvilinear Electronics Based on Inorganic Materials

Efficient and mechanically robust stretchable organic light-emitting devices by a laser-programmable buckling process

High performance flexible H-shaped single layered organic light emitting diode

Flexible organic light-emitting diodes with enhanced light out-coupling efficiency fabricated on a double-sided nanotextured substrate.

Flexible Light Emission Diode Arrays Made Of Transferred Si Microwires-Zno Nanofilm With Piezo-Phototronic Effect Enhanced Lighting

Two-Dimensional Stretchable Organic Light-Emitting Devices with High Efficiency.

LEDs Based on Small Molecules

Enhancing Light Extraction of Organic Light Emitting Diodes by Deep-Groove High-index Dielectric Nanomesh Using Large-area Nanoimprint