Abstract:There are heat transfer correlations for heat transfer analysis in single tube geometries after several experimental and theoretical heat transfer studies in these single tube geometries. This is not the case for heat transfer analysis in rod bundle geometry with regard to proposed square fuel assembly of the Supercritical-Water-Cooled Reactor (SCWR) European Atomic Energy (EURATOM) design. Thus limited heat transfer studies exist on rod bundle geometry at supercritical pressures. Heat transfer correlations with accurate prediction capabilities of coolant and wall temperatures will be helpful in carrying out heat transfer studies at supercritical pressures. This paper presents the performance of twelve selected heat transfer correlations assessed on the 1/8th bare square fuel assembly of the SCWR EURATOM design using Simulation of Turbulent flow in Arbitrary Regions Computational Continuum Mechanics C ++ based code (STAR-CCM + CFD code). The obtained numerical results were compared with the results obtained by Waata numerical experimentation. Overall, the Cheng et al. correlation provided the most satisfying prediction for the wall temperatures in all the sub-channels and captured closely Wataa's Numerical data. The maximum wall temperature was obtained in sub-channel 9, the hottest sub-channel and exceeded the design limit 620 °C by 60 °C for the Cheng correlation. The difference in temperature between the hottest and coldest sub-channels 9 and 1 respectively was approximately 80 °C. It was found that Cheng correlation is best suited for heat transfer prediction in rod bundle geometry at supercritical pressures with regard to the proposed square fuel assembly of the SCWR EURATOM design. It was also found that the different numerical tools adopted for this study and Waata study were able to capture the trends of normal, enhanced and deteriorated heat transfer regimes normally observed at supercritical pressures. Nevertheless, experimental investigations involving rod bundles adopted in this study should be conducted to validate the results obtained numerically and address the inconsistency of the conclusions drawn when compared with Waata data and other similar studies.

Optimization of heat transfer coefficient correlation at supercritical pressure using genetic algorithms

Reference temperature correction and dimensionless number analysis for heat transfer of supercritical CO2 in horizontal tubes

A Method of Extending Subcritical Heat Transfer Correlations to Supercritical Conditions

Discussion and perspectives for improvements of heat transfer correlation capabilities for fluids at supercritical pressures

A New Heat Transfer Correlation for Supercritical Fluids

Assessment of heat transfer correlations in the sub-channels of proposed rod bundle geometry for supercritical water reactor

Study on supercritical CO2 coal-fired boiler based on improved genetic algorithm

High‐heat Flux Flow and Heat Transfer Transitions in a Supercritical Loop: Numerical Verification and Correlation

Experimental study on heat transfer in vertical cooling tube cooled by downward flow in the passive heat removal system of SCWR

A Brief Review on Convection Heat Transfer of Fluids at Supercritical Pressures in Tubes and the Recent Progress

NEW FLOW-PATTERN-BASED HEAT TRANSFER CORRELATIONS FOR WATER IN MICRO/MINICHANNELS

Net‐based thermal‐fluid model and hybrid optimization of cooling channels

Analysis of Heat Transfer Characteristics in Core of Supercritical Water Cooled Reactor

New correlation of the subcooled flow boiling heat transfer coefficient for hybrid micro/nanostructured surfaces with high heat flux incidence

Theoretical Investigations on Heat Transfer to H2O/CO2 Mixtures in Supercritical Region

On the correlation of buoyancy-influenced turbulent convective heat transfer to fluids at supercritical pressure

Intelligent optimization design of shell and helically coiled tube heat exchanger based on genetic algorithm

The Coupled Process-Component Modeling and Optimization for Heat Exchanger of Supercritical CO2 with Property Variation Based on Heat Current Method

Thermodynamic Optimization of Heat Transfer Process in Thermal Systems Using CO2 As the Working Fluid Based on Temperature Glide Matching

Heat transfer characteristics and optimization strategies in supercritical fluid heat exchangers with non-uniform thermal boundaries: A systematic review

Heat transfer of supercritical pressure water in helical tubes