Abstract:In recent years, PET (polyethylene terephthalate) fabrics has been widely used in many fields, such as industrial field and clothes, based on the excellent mechanical characteristics and chemical resistance. On the other hand, to introduce the new functions, the modification of these fibers and textiles by radiation induced graft polymerization has been studied. However, it is not easy to graft functional polymer chains onto PET fibers, because PET fibers possess high chemical resistance and thermal stability, as well as the relatively high resistance to radiation. We have adapted the new method of electron beam grafting using the film bag which can be vacuumed and sealed by heating the film bag to avoid exposure. This method can read to high degree of grafting by preventing the decrease of generated radicals in polymer. Emulsion grafting was tried by this film bag method. When the molecular weight ratio between the GMA (glycidyl methacrylate) cone. and the activator conc. was 180 or more, the degree of grafting was greatly improved. This phenomenon is considered as follows. At high surfactant concentrations in aqueous solution, GMA is sufficiently emulsified, and is the droplet of the stable hydrophilic surface. However, at low surfactant concentrations in aqueous solution, droplets of GMA can't be completely emulsified, it becomes unstable hydrophobic surface, and increase the GMA dissolved in the aqueous solution. Accordingly, it was considered that the degree of grafting was increased by the high sorption of GMA to the hydrophobic PET fibers. Also, PET film could get the high degree of grafting compared with polyethylene (PE) for the material of the film bag used as a reaction container. Because the film-bag made of polyethylene is easily generated the polymer radicals by irradiation, and therefore, the degree of grafting on fiber decrease by the monomer consumption on the films. As a result, 27% of grafting degree was obtained at the 20 wt% GMA emulsion with 0.3 wt% Span 20 under the low 100 kGy dose by the vacuum sealed method using the PET film-bag.

Radiation-induced Grafting of Perfluorinated Vinyl Ether into Fluorinated Polymer Films

Perfluorinated polymer film with functional group prepared by radiation-induced grafting

Bulk Graft Modification of Polyolefin Membranes by Combining Pre-Irradiation-Induced Graft and Supercritical Co2-Swelling Polymerization

Controlled Grafting of Comb Copolymer Brushes on Poly(tetrafluoroethylene) Films by Surface-Initiated Living Radical Polymerizations.

Poly(vinylidene Fluoride) with Grafted Poly(ethylene Glycol) Side Chains Via the RAFT-Mediated Process and Pore Size Control of the Copolymer Membranes

Improving the Hydrophilicity of Poly(vinylidene Fluoride) Porous Membranes by Electron Beam Initiated Surface Grafting of AA/SSS Binary Monomers

Synthesis of Fluorinated Polymer Electrolyte Membranes by Radiation Grafting and Atom Transfer Radical Polymerization Techniques

Fluorinated acrylate-grafted LDPE films from UV-induced photograft polymerization

Facile Grafting Modification of Poly(Vinylidene Fluoride‐ Co ‐trifluoroethylene) Directly from Inner CHCH Bonds

RADIATION GRAFTING OF STYRENE/MALEIC ANHYDRIDE OR STYRENE/DIMETHYLAMINO ETHYL METHACRYLATE BINARY SYSTEMS ONTO POLYTETRAFLUOROETHYLENE POROUS MEMBRANES

Radiation-induced Grafting of Ethyl Styrenesulfonate Onto Polyvinylidene Fluoride Resin

Radiation Induced Graft Copolymerization of N-Butyl Acrylate Onto Poly(ethylene Terephthalate) (PET) Films and Thermal Properties of the Obtained Graft Copolymer

Synthesis and Characterization of a New Fluorinated Polyether Glycol Prepared by Radical Grafting of Hexafluoropropylene Onto Polytetramethylene Glycol

PTFE-g-GMA graft copolymer synthesis promoted by oxidative gamma-rays method and characterization

Studies on Surface Graft Polymerization of Acrylic Acid Onto PTFE Film by Remote Argon Plasma Initiation

Grafting copolymerization of N,N-dimethyacrylaminoethylmethacrylate (DMAEMA) onto preirradiated polypropylene films

Influence of Monomer Composition in the Electron Beam Graft Polymerization Condition Onto PET Fabrics

A Novel Perfluorocyclobutyl Aryl Ether-Based Graft Copolymer Via 2-Methyl-1,4-bistrifluorovinyloxybenzene and Styrene

Structure transformation and interfacial properties enhancement of high-strength carbon fibers (T800) grafted by glycidyl methacrylate via heat treatment synergized with ionizing radiation

Surface Grafting Polymerization and Modification on Poly (tetrafluoroethylene) Films by Means of Ozone Treatment

Surface Modification Of Poly (Tetrafluoroethylene) Function Materials By Plasma-Induced Graft Copolymerization Of Acrylic Acid