Removal of Trace Arsenic from Water by Chitosan Flocculation - Ultrafiltration

白艳,王志,樊智锋,王纪孝,王世昌

DOI: https://doi.org/10.3969/j.issn.1007-8924.2008.03.018

2008-01-01

Abstract:The arsenic removal is a critical issue in water treatment.In this study,chitosan was chosen as the arsenic removal flocculant,and a flocculation-ultrafiltration integrated process was adopted to remove the trace arsenic in water.Main factors affecting the arsenic removal were investigated.The results indicate that pH value 4.6,chitosan concentration 0.36 g/L,stirring power 8.11×10-2 W and settling time 40 min are the optimal conditions.The arsenic removal is not obviously affected by the operation pressure and crossflow velocity of ultrafiltration process.With temperature increasing,the arsenic removal has a decreasing trend.Both of the concentration of As(Ⅲ) and As(Ⅴ) in the arsenic simulated water were 0.1 mg/L,and after the flocculation-ultrafiltration process,the concentration of As(Ⅲ) reduced to about 0.02 mg/L,and that of As(Ⅴ) reduced within 0.01mg/L.The As(Ⅲ) removal reached 80% and that of As(Ⅴ) reached more than 90%.Moreover,the fouling of the ultrafiltration membrane was investigated,and some methods of cleaning ultrafiltration membrane were explored.The results indicate that the fouled ultrafiltration membrane can be better cleaned with hydrochloric acid(pH=2),and the recovery of membrane flux can reach above 72%.