Abstract:This research describes a three dimensional (3-D) computational fluid dynamics (CFD) simulation coupled with population balance equations (PBE) to study hydrodynamics and biomass production in a laboratory-scale stirred-tank bioreactor. The gas-liquid-solid flow was modelled using a Eulerian multiphase and turbulence (RNG) model. The energy dissipation rates, gas holdup, flow patterns, Sauter mean bubble diameter, and volumetric mass transfer coefficient were investigated for three different types of impeller using a multiple reference frame (MRF) model within the whole multiphase bioreactor. The effects of aeration rate and impeller speed on gas holdup and volumetric mass transfer coefficient were investigated owing to oxygen limitation in high cell density cultivation (HCDC). As high viscosity puts a limit on the efficiency of the bioreactor, the influences of viscosity on Sauter mean diameter, gas holdup, and volumetric mass transfer coefficient were also assessed. To determine growth kinetics as well as gas holdup, a set of experiments was performed. The numerical results of gas holdup and kLa were compared with the experimental data. Obtained results suggest that the Scaba impeller results in higher values of volumetric mass transfer coefficient, and subsequently higher biomass concentrations. One of the greatest problems in HCDC is feed accumulation in particular places. As depletion of substrate occurs near the impeller, the best spot for feeding purposes is in the vicinity of the impeller. Current research gives insight into the determination of the optimal operating conditions of HCDC in stirred bioreactors.

CFD Simulation of Mixing Process in Stirred Bioreactor and Its Application in Fermentation

CFD Simulation of Stirred Bioreactor and Its Application in the Inosine Production

CFD-PBM Simulation and Scale-Up of the Pilot-Scale Bioreactor

Study on Scale-Up of Anaerobic Fermentation Mixing with Different Solid Content

Computational Fluid Dynamics Simulations and Experimental Validation of Macromixing and Flow Characteristics in Low-Density Polyethylene Autoclave Reactors

CFD simulation of cross flow in multi-tubular fixed-bed reactor of industrial level

Numerical Simulation on Process of Heterogeneous Mass Transfer of Oxygen in Stirred Tank

A CFD-PBM Coupled Method to Optimize a Pilot-Scale Stirred Bioreactor

Computational fluid dynamics simulation of different impeller combinations in high viscosity fermentation and its application]

CFD optimization of continuous stirred-tank (CSTR) reactor for biohydrogen production

CFD simulation of solid-liquid suspension characteristics in stirred tank reactor

Numerical Simulation of Power Consumption and Mixing Characteristics of Novel Large-Double-blade Impeller

Computational Fluid Dynamics Simulation of Gas-Liquid Oxygen Transfer with Different Impeller Combinations

Optimization of flow field in oxidation zone and experimental study for new AmOn bioreactor

Experiments and a three‐phase computational fluid dynamics (CFD) simulation coupled with population balance equations of a stirred tank bioreactor for high cell density cultivation

CFD Simulation of the Flow Patterns and Structure Optimization Within a Continued-Flow Integrated Biological Reactor

CFD evaluation of hydrophobic feedstock bench-scale fermenters for efficient high agitation volumetric mass transfer

Computational fluid dynamics modeling of an inverted frustoconical shaking bioreactor for mammalian cell suspension culture

CFD Studies on Hydrodynamic Characteristics of Shaking Bioreactors with Wide Conical Bottom

Fluid dynamics investigation of variant impeller combinations by simulation and fermentation experiment

Progress of the Experimental Researches and Numerical Simulations of the Flow Fields in Stirred Tanks