Mechanical and Thermal Properties of Polypropylene (PP) Composites Filled with CaCO3 and Shell Waste Derived Bio-Fillers
Zhitong Yao,Meisheng Xia,Liuqin Ge,Tao Chen,Haiyan Li,Ying Ye,Hao Zheng
DOI: https://doi.org/10.1007/s12221-014-1278-5
IF: 2.5
2014-01-01
Fibers and Polymers
Abstract:The clam shell (CS) waste was first modified by furfural and hydrochloric acid to prepare fillers FCS and ACS, which were then used as fillers in polypropylene (PP), as well as the commercial calcium carbonate (CC). These fillers were characterized and analyzed by means of X-ray diffraction (XRD), atomic force microscopy (AFM), particle size analyzer, Fourier transformed infrared spectroscopy (FTIR) and contact angle measurement. The mechanical and thermal properties of PP composites were investigated as well. XRD analysis indicated that the major crystalline phase of CC was calcite; of shell waste derived fillers, calcite and aragonite. The CC was fully hydrophobic, while the shell derived fillers were amphiphilic. Mechanical property studies showed that the incorporation of FCS played the role mainly of toughening the PP; of CC, CS and ACS, that of reinforcing. The optimum filler contents of CS, ACS and FCS could reach 5, 7 and 15 wt.%, respectively, to obtain a good balance between fracture toughness and stiffness of the PP composites. Polarized optical microscopy (POM) observation indicated that the inclusion of these fillers could promote the heterogeneous nucleation of PP.