Abstract:Currently eutrophication has become a hot issue all over the world.The removal of phosphorus from wastewaters is regarded as an important approach to fight eutrophication since phosphorus is one of the main factors causing eutrophication.The chemical phosphorus removal technology with ferric salt as a precipitant is in widespread use to meet the wastewater discharge standard.The optimization of phosphorus removal technology helps to cut down the cost of wastewater treatment.Herein the response surface methodology(RSM)is introduced to investigate the individual and combined effects of operation parameters.The performance of chemical phosphorus removal technology with ferric salt as a precipitant is dependant on a series of factors.Fe/P ratio,pH and flash mixing speed(FMS)were chosen as objects of study,and single-factor experiment and multiple-factor experiment were carried out to optimize the phosphorus removal efficiency.The results of single-factor experiment showed that both Fe/P ratio and pH had significant effects on phosphorus removal,but FMS did not.When the phosphorus concentration was 100mg/L,the optimal operation parameters were Fe/P ratio 3.0,pH 8.0,FMS 175-225r/min.The results of multiple-factor experiment showed that the individual effects of operation parameters on phosphorus removal were in order as Fe/PpH FMS.The combined effects of operation parameters were in order as Fe/P-FMS pH-FMS Fe/P-pH,among which the effects of Fe/P-FMS and Fe/P-pH were positive and the effect of pH-FMS was negative.Based on the experiment,priority/combinationmodel was proposed to enhance the phosphorus removal with ferric salt as a precipitant.The optimal operation parameters were as follows:Fe/P=2.57,pH=6.31and FMS=136r/min,when the phosphorus concentration was 100mg/L.Both synthetic and real wastewaters were used to verify the feasibility ofpriority/combinationmodel.Operated according to the model,the phosphorus removal was larger than 97%and the fractional error was less than 3%.It can be concluded that the response surface methodology is feasible for the optimization of operation parameters in wastewater treatment processes.Thepriority/combinationmodel is effective for the improvement of phosphorus removal from wastewaters with ferric salt as a precipitant.During the wastewater treatment,the synergic action of operation parameters should be fully used,while the antagonistic action of operation parameters should be carefully avoided.

STUDY ON PHOSPHOR REMOVAL FROM CITY WASTEWATER BY MAGNESIUM AND AMMONIUM SALTS

Phosphorus removal and recovery from wastewater by highly efficient struvite crystallization in an improved fluidized bed reactor

Removing Nitrogen and Phosphorus from Wastewater with Magnesium Salt

Process Optimization for Phosphorus Removal with Ferric Salt by Response Surface Methodology

Experiment on Extracting Magnesium Ammonium Phosphate Crystallization Through Precipitation Method to Recycle Phosphorus in Sewage

Effects of Fe(II)/P Ratio and Ph on Phosphorus Removal by Ferrous Salt and Approach to Mechanisms

Research on Optimization for Phosphorus Removal with Ferrous Salt Process

Phosphate Removal Efficiency and Life Cycle Assessment of Different Anode Materials in Electrocoagulation Treatment of Wastewater

Comparison of Phosphorus Removal Processes by Ferrous Salts and Ferric Salts

Phosphorus Removal Using Ferric–calcium Complex As Precipitant: Parameters Optimization and Phosphorus-Recycling Potential

Advanced Treatment Of Ammonium Removal From Coking Wastewater By Chemical Precipitation

Research on simulated nitrogen and phosphorus wastewater with the magnesium ammonium phosphate process based on thermodynamic analysis

PHREEQC program-based simulation of magnesium phosphates crystallization for phosphorus recovery

Preparation of magnesium-modified steel slag and its adsorption performance for simultaneous removal of nitrogen and phosphorus from water

A novel magnesium-rich tricalcium aluminate for simultaneous removal of ammonium and phosphorus: Response surface methodology and mechanism investigation

Study on Removal of Phosphorus As Struvite from Synthetic Wastewater Using a Pilot-Scale Electrodialysis System with Magnesium Anode.

Phosphorus Removal and Its Reclamation from Waste Water

Effect of saline water ionic strength on phosphorus recovery from synthetic swine wastewater

Magnesium Ammonium Phosphate Crystallization: A Possible Way for Recovery of Phosphorus from Wastewater

Study on technical measures for high efficient operation of phosphorus,arsenic-containing wastewater treatment project

Modeling Studies of the Crystallization Process of Magnesium Ammonium Phosphate for Wastewater Treatment Based on the PHREEQC Program