Abstract:This paper proposes a novel approach that employs error amplification and ADC-based dual-mixer time-difference (ADC-based-DMTD) technique for high-precision locking of laser repetition frequency with compact size. This electronic system consists of two main components: a digitized error amplification module (EAM) and an FPGA-based digital frequency locking module (DFLM). The EAM mainly integrates a configurable frequency generator (CFG), a configurable frequency multiplier (CFM) and a mixer to process the laser pulses and a high-stability reference source (e.g., an atomic clock), enabling high-precision locking of pulse lasers operating at different repetition frequencies. By employing frequency multiplication and mixing, the EAM amplifies the laser's frequency error and performs frequency down-conversion, enhancing measurement sensitivity and reducing the hardware requirements of the back-end. The DFLM receives the EAM outputs by using an ADC-based-DMTD method to precisely measure frequency errors, then the digital proportional-integral-derivative (PID) controller provides feedback to achieve accurate frequency locking. Initial testing with a voltage-controlled oscillator (VCO) demonstrated excellent locking performance, achieving an Allan deviation of $9.58 \times 10^{-14}$ at 10 seconds and a standard deviation (STD) of 7.7 \textmu Hz root mean square (RMS) after locking, marking a five-order-of-magnitude stability enhancement. In laboratory experiments with a custom-built femtosecond fiber laser, the system achieved robust locking of the repetition frequency, with a stability improvement from $1.51 \times 10^{-7}$ to $1.12 \times 10^{-12}$ at a 10-second gate time and an STD of 0.43 mHz RMS after locking.

Automatic Locking System of Extended Cavity Diode Laser Based on LabwindowsCVI

External Cavity Diode Laser with Long-Term Frequency Stabilization Based on Mode Boundary Detection

Compact Extended Cavity Diode Laser System for Small Optically Pumped Cesium Beam Frequency Standards

Designing an Automatic Frequency Stabilization System for an External Cavity Diode Laser Using a Data Acquisition Card in the LabVIEW Platform

Long-Term Frequency Stabilization System For External Cavity Diode Laser Based On Mode Boundary Detection

Research on the Frequency Stabilization System of an External Cavity Diode Laser Based on Rubidium Atomic Modulation Transfer Spectroscopy Technology

LabVIEW-based laser frequency stabilization system with phase-sensitive detection servo loop for Doppler LIDAR applications

A simple laser locking system based on a field-programmable gate array

A Digital and Compact High-Precision Locking System for Pulse Laser Repetition Frequency

High-accuracy Control System Based on DDS for Laser Frequency and Its Applications

A Digital Phase Lock Loop for an External Cavity Diode Laser

An auto-locking ultra-stable laser with sub-hertz linewidth

Active Stabilization of a Diode Laser Injection Lock

Frequency-stabilized Diode Laser at 780 Nm with a Continuously Locked Time over 100 H

Modulation-free frequency stabilization system of external cavity diode laser based on Sagnac loop

Locking the Frequency of the External Cavity Diode Laser at 894.6 nm Using Polarization Spectroscopy

High-performance Frequency Stabilization of Ultraviolet Diode Lasers by Using Dichroic Atomic Vapor Spectroscopy and Transfer Cavity

An automatic frequency stabilized laser with hertz-level linewidth

A Compact Setup of Saturated Absorption Spectroscopy for Diode Laser Frequency Stabilization

Modulation-Free Frequency Stabilization of A Grating-External-Cavity Diode Laser by Magnetically Induced Sub-Doppler Dichroism in Cesium Vapor Cell

A Balanced Dual-Intracavity Dual-Mode Interlocking Method for Fiber Laser Self-Reference Wavelength Stabilization