Abstract:In the study of solid rocket motor (SRM) combustion instability, modeling and analyzing the combustion response of the solid propellant is a laborious task. We propose a new idea, an equivalent linear system method, for modeling solid propellant combustion response with three steps: first, simulating the transient combustion process under pulse pressure excitation for only one CFD case; then, treating the combustion process as a black-box and obtaining the transfer function of the combustion process from the CFD result; finally, predicting and analyzing the combustion response based on the transfer functions. For the AP/HTPB sandwich propellant with p ̄=3MPa, the amplitude, duration, and direction of excitation pulses are studied. The new method is also verified, with a maximum relative error of 4.3% for burning rate response under p ̃≤1MPa (as high as one-third of the pressure DC). Applicability of this new method is demonstrated for another two AP/HTPB sandwich propellants with different configuration under p ̄=8MPa and p ̄=10MPa , showing that the system-simulated combustion responses of burning surface temperature and burning rate are consisted well with the CFD results and the maximum relative error of burning rate response is 2.1%. Asymmetric combustion response for positive and negative pressure perturbations is a new finding based on the CFD and simulation results. Besides, a new approach using dual transfer functions is proposed to ensure high accuracy for the simulation of solid propellant combustion. The pressure-coupled response function is predicted by this method for the sandwich propellant under p ̄=5MPa and p ̃=20kPa within a wide continuous frequency range (0–3000 Hz). The comparison with CFD results indicates that the relative bias of R p is less than 2%. With the proposed method, the combustion response to arbitrary pressure excitations can be simulated with high accuracy, high time-resolution, and high speed. The method shows great advantage and potential in simulating and predicting combustion instability.

Whole Research on Expert System of Solid Propellants

Study on Combustion Modeling of Solid Propellant Ingredients Using Detailed Chemical Kinetics

Access to Empirical Formulations of Combustion Efficiency for Gas Turbine Combustors with Improved Generalization Ability

Estimation of Thermophysical Properties of Solid Propellants Based on Particle Packing Model

Rapid Optimization Method of Solid Rocket Motor Propellant with Structural Strength

Research progress in dynamic mechanical behavior of solid propellants

Review of the Mechanical Properties and Numerical Simulation of Composite Solid Propellants

Predicting Effects of Oxidizer Content and Particle Size on NEPE Combustion Characteristics

A Constitutive Model of the Solid Propellants Considering the Interface Strength and Dewetting

The Research Of The Sls Process Optimization Based On The Hybrid Of Neural Network And Expert System

Review of multi‐scale mechanical behavior research on composite solid propellants based on data‐driven approach

Real-time intelligent diagnosis system for missile propellant filling equipment

Solid Propellants

Research on the Dynamic Model of Plasma Ignition Process of Solid Propellant

Stochastic Equilibrium Analysis to Optimize Solid Propellant Combustion Gas Composition

A Discontinuous Galerkin–Finite Element Method for the Nonlinear Unsteady Burning Rate Responses of Solid Propellants

AP/HTPB combustion response simulation with a new equivalent linear system method

Performance Prediction of Solid Propellant Rocket Motors

Parameters Data Base of Propellants in Laser Propulsion

Evaluation and prediction methods for launch safety of propellant charge based on support vector regression

Intelligent Optimization Of Process Parameters In Selective Laser Sintering