Abstract:In this article, dynamic and static load tests of a concrete highway bridge, which is a deteriorated and repaired, are presented depending on displacement and strain data for engineering decision making about the operation of a critical bridge. Static load test was carried out to determine the live load distribution factor (DF) and load-rating factor (RF) as well as serviceability by means of deflection limits. Modal characteristics in terms of structural frequencies and mode shapes and impact factor (IM) were identified from the dynamic load test for different truck-load and speed cases, and finite element (FE) model. The DF and rating factor (RF) were also compared with those calculated according to AASHTO standard and FE model. The results showed that the DF calculated by American Association of State Highway and Transportation Officials (AASHTO) standard gave more conservative results when compared with the experimental and FEM approaches. Similarly, the load-rating factor (RF) calculated by AASHTO standard yielded to more conservative results comparing with the experimental FEM approaches using practical DFs. Maximum deflections in static cases and dynamic cases were found to be within the limit calculated by (L/800) given in the AASHTO code. Impact factors among all the cases were obtained much smaller than the one recommended by AASHTO standard (33%). The modal properties were obtained to track changes in dynamic behavior due to stiffness and boundary effects as well as for finite element model calibration. The calibrated FE model of the bridge also indicated that the load carrying capacity of the bridge is adequate after repair. Finally, the results from the current study reveal that use of experimental data can be utilized to obtain load rating with minimum interruption to bridge operations through computer vision technology and methods.

Research on Bridge Dynamic Load Test and Its Finite Simplified Simulation

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Research on computational method and dynamic characteristics of traffic vibration of steel bridge

Design and Dynamical Analysis of New Light Deployable Bridge

Remotely Collaborative Pseudo-Dynamic Testing Of A Multi-Span Bridge

Reduced Models for Simulating Collisions Between Trucks and Bridge Piers

Bridge Load Testing for Identifying Live Load Distribution, Load Rating, Serviceability and Dynamic Response

Finite element analysis and test study of dynamic behavior of a cable-stayed bridge

Static and Dynamic Behavior of Continuous Box Girder Bridge and Its Experimental Investigation

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Load Test Analysis of a Long-Span Prestressed Nano-Concrete Highway Bridge

Load Test Analysis and Research on Long-Span Concrete Continuous Rigid Frame Bridge

Incorporating Site-Specific Weigh-in-motion Data into Fatigue Life Assessment of Expansion Joints under Dynamic Vehicle Load

A bridge dynamic response analysis and load recognition method using traffic imaging

Study on Moving Loading Test Instead of Conventional Static Loading Test in Bridge Inspection

Load Test of Long- span Curved Continuous Frame Bridge with High Pier

Static and dynamic load test on concrete hollow-core slab bridge

Dynamic Reliability Assessment of Heavy Vehicle Crossing a Prototype Bridge Deck by Using Simulation Technology and Health Monitoring Data

Dynamic research on higih-pier & long-span continuous rigid frame bridge from overload vehicle

Dynamic Analysis Techniques for Road Bridges Under Large Traffic Flows

Structural damage identification based on dynamic deflection sensitivity of bridge under vehicle loading