Abstract:Scalable and cost-effective synthesis and assembly of technologically important nanostructures in three-dimensional (3D) substrates hold keys to bridge the demonstrated nanotechnologies in academia with industrially relevant scalable manufacturing. In this work, using ZnO nanorod arrays as an example, a hydrothermal-based continuous flow synthesis (CFS) method is successfully used to integrate the nanoarrays in multi-channeled monolithic cordierite. Compared to the batch process, CFS enhances the average growth rate of nano-arrays by 125%, with the average length increasing from 2 mu m to 4.5 mu m within the same growth time of 4 hours. The precursor utilization efficiency of CFS is enhanced by 9 times compared to that of batch process by preserving the majority of precursors in recyclable solution. Computational fluid dynamic simulation suggests a steady-state solution flow and mass transport inside the channels of honeycomb substrates, giving rise to steady and consecutive growth of ZnO nano-arrays with an average length of 10 mu m in 12 h. The monolithic ZnO nano-array-integrated cordierite obtained through CFS shows enhanced low-temperature (200 degrees C) desulfurization capacity and recyclability in comparison to ZnO powder wash-coated cordierite. This can be attributed to exposed ZnO {10 (1) over bar0} planes, better dispersion and stronger interactions between sorbent and reactant in the ZnO nanorod arrays, as well as the sintering-resistance of nano-array configurations during sulfidation-regeneration cycles. With the demonstrated scalable synthesis and desulfurization performance of ZnO nano-arrays, a promising, industrially relevant integration strategy is provided to fabricate metal oxide nano-array-based monolithic devices for various environmental and energy applications.

Simple and Efficient Treatment for Producing Porous Nanostructures Using Gas−Solid Reactions

Facile synthesis of monodisperse aluminum nitride microspheres

Novel Route to WO<i><sub>x</sub></i>Nanorods and WS<sub>2</sub>Nanotubes from WS<sub>2</sub>Inorganic Fullerenes

A Simple Alcohothermal Synthetic Route to High Surface Area Zirconia Aerogel

Aluminothermal Reaction Approach for Micro‐/Nanofabrications: Syntheses of In2O3 Micro‐/Nanostructures and InN Octahedral Nanoshells

Preparation and Characterization of Alumina Nanofibers by Gas-Solid Reaction Method

A feasible strategy to balance the crystallinity and specific surface area of metal oxide nanocrystals

Synthesis and characterization of activated alumina with high thermal stability by a low-heat solid-phase precursor method

Ultrasound As a Tool to Synthesize Nano-Sized Silica–Alumina Catalysts with Controlled Mesoporous Distribution by a Novel Sol–Gel Process

Porous MgO-based ceramics synthesized by the volume expansion effect: Designing and performance

Nanotubular Gamma Alumina with High-Energy External Surfaces: Synthesis and High Performance for Catalysis

Gas-Liquid Interfacial Deposition Synthesis of Alumina with Large Mesopores

A Simple Method To Synthesize Nanowires

Synthesis and Characterization of Thermally Stable Mesostructured Sulfated Zirconia by a Novel Sulfate-Assisted Alcohothermal Route

A new route to synthesis of γ-alumina nanorods

Scalable continuous flow synthesis of ZnO nanorod arrays in 3-D ceramic honeycomb substrates for low-temperature desulfurization

Facile Synthesis of Highly Porous Metal Oxides by Mechanochemical Nanocasting

Coprecipitation Synthesis of Large-Pore-Volume Γ-Alumina Nanofibers by Two Serial Membrane Dispersion Microreactors with a Circulating Continuous Phase

Enhancing sorption kinetics by oriented and single crystalline array-structured ZSM-5 film on monoliths

Precipitation Preparation Of High Surface Area And Porous Nanosized Zno By Continuous Gas-Based Impinging Streams In Unconfined Space

Preparation of spherical α‐Al 2 O 3 nanoparticles by microwave hydrothermal synthesis and addition of nano‐Al seeds