Abstract:At present, researchers in the field of pipeline inspection focus on pipe wall defects while neglecting pipeline defects in special situations such as welds. This poses a threat to the safe operation of projects. In this paper, a multi-node fusion and modal projection algorithm of steel pipes based on guided wave technology is proposed. Through an ANSYS numerical simulation, research is conducted to achieve the identification, localization, and quantification of axial cracks on the surface of straight pipelines and internal cracks in circumferential welds. The propagation characteristics and vibration law of ultrasonic guided waves are theoretically solved by the semi-analytical finite element method in the pipeline. The model section is discretized in one-dimensional polar coordinates to obtain the dispersion curve of the steel pipe. The T(0,1) mode, which is modulated by the Hanning window, is selected to simulate the axial crack of the pipeline and the L(0,2) mode to simulate the crack in the weld, and the correctness of the dispersion curve is verified. The results show that the T(0,1) and L(0,2) modes are successfully excited, and they are sensitive to axial and circumferential cracks. The time–frequency diagram of wavelet transform and the time domain diagram of the crack signal of Hilbert transform are used to identify the echo signal. The first wave packet peak point and group velocity are used to locate the crack. The pure signal of the crack is extracted from the simulation data, and the variation law between the reflection coefficient and the circumferential and radial dimensions of the defect is calculated to evaluate the size of the defect. This provides a new and feasible method for steel pipe defect detection.

Guided Wave Inspection of Long Steel Pipe Using Non-Axisymmetric End Loading Transducer

Evaluation of Pipe Axial Defeat Through the Use of Ultrasonic Guided Wave and Matching Pursuit

Non-destructive Evaluation of Spiral-welded Pipes Using Flexural Guided Waves

Non-Contact Inspection for Inner Surface of Small-Diameter Pipes Based on Laser-Psd

The Characterization Of Guided Waves On Hollow Cylinder From Non-Axisymmetric End Loading

Noncontact Laser Inspection Based on a PSD for the Inner Surface of Minidiameter Pipes.

Longitudinal guided waves in pipes excited by non-axisymmetric multielement surface loading

Development of a Torsional Guided Wave EMAT for Internal Inspection of Ferromagnetic Pipes

Deconvolution Imaging of Weak Reflective Pipe Defects Using Guided-Wave Signals Captured by a Scanning Receiver

An Enhanced Long-Range Guided-Wave Pipe Inspection Method Based on Local Axial 2-D Signal Acquisition and Processing.

A Flexible and Noncontact Guided-Wave Transducer Based on Coils-Only EMAT for Pipe Inspection

The Application Of Low Frequency Longitudinal Guided Wave Mode For The Inspection Of Multi-Hole Steel Floral Pipes

A New Longitudinal Mode Guided-Wave EMAT with Periodic Pulsed Electromagnets for Non-Ferromagnetic Pipe

Guided Wave Imaging of Oblique Reflecting Interfaces in Pipes Using Common-Source Synthetic Focusing

Theoretical and Experimental Studies of Longitudinal Guided Wave Generation in Hollow Cylinders by Multielement Transducers

Location Detection and Numerical Simulation of Guided Wave Defects in Steel Pipes

Investigation of pipe thickness monitoring using the shear wave EMAT technology with high lift-off distance

A high-efficiency nondestructive method for remote detection and quantitative evaluation of pipe wall thinning using microwaves

Numerical simulation on the interaction of longitudinal guided waves with double defects in pipes

Non-destructive Evaluation of Pipes by Microwave Techniques and Artificial Neural Networks

Excitation of Axisymmetric and Non-Axisymmetric Guided Waves in Elastic Hollow Cylinders by Magnetostrictive Transducers