Forming characteristics of the novel co-axial stratified turbulent burner

WU Jiang,PAN Wei-guo,REN Jian-xing,ZHANG Yan-yan,WANG Peng,ZHANG Ming-chuan,FAN Wei-dong

DOI: https://doi.org/10.3969/j.issn.1009-6094.2010.01.020

2010-01-01

Abstract:The co-axial stratified swirling burner is a novel low NO_x burner, which can reduce NO_x forming by proper arrangement between the primary and secondary air.Experiments were conducted on the co-axial stratified swirling burner designed in this paper to investigate NO_x yielding characteristics by adjusting the swirling strength of the primary and secondary air and the ratio of primary to secondary air.The experimental results have shown that the primary air needs to swirl and arrive at appropriate swirling intensity and the secondary air needs to set at a suitable swirling intensity so that NO_x forming level can be reduced at some ratio of the primary to the total air.Under experimental conditions tested in this paper, the swirling intensity of the primary air is needed to be maintained within the range of 0.35 to 0.47, the swirling intensity of the secondary air needs to be 1.30 to 1.50, and the ratio of the primary to secondary air is 33 % , so as to get the minimum NO_x yield.In addition, it is also necessary to apply proper mechanical methods, such as increasing extending port, to further reduce the NO_x forming level.