Abstract:This paper presents characterization and compensation of the thermal bias drift of a MEMS accelerometer whose effective stiffness is electrostatically tuned to a low value with the help of the single-sided parallel plates (SSPPs) capacitors. A temperature drift model for the proposed accelerometer is built and the temperature effect on the mechanical stiffness and the circuit gains is characterized. The characterization reveals that the variations of the feedforward coefficient including the mechanical stiffness and the readout gain due to the temperature change play a significant role in the bias drift of output of the proposed closed-loop accelerometer. On the other hand, the variations of both feedback gain and tuning gain as a function of temperature are one-order-of-magnitude less than that of the feedforward coefficient. To calibrate the feedforward coefficient, an excitation signal as a form of AC reference displacement is introduced to drive the proof mass and the readout response is demodulated to calibrate the variance of the feedforward coefficient correspondingly. An open-loop compensation scheme for the temperature-induced bias drift using the variance of the calibrated response is proposed accordingly. Alternatively, the calibrated response can be controlled to a preset value by a new proportion integral derivative (PID) controller by the adjustment of the SSPP tuning voltage. The output of the PID controller is used for the calibration of the introduced bias from the electrostatic tuning force. Therefore, a closed-loop compensation of the thermal bias drift is achieved by remaining the feedforward coefficient while eliminating the calibrated bias. Experiments under a temperature cooling process and different tuning voltages are carried out to verify two proposed compensation schemes. The temperature drift coefficients (TDCs) of both compensated outputs exhibit at least one-order-of-magnitude reduction in response to the temperature change. When the effective stiffness of the accelerometer is tuned to about 4.19 N m(-1), the TDC of the compensated output using the proposed open-loop or closed-loop compensation schemes is reduced to about 0.1136 or 0.0391 mg degrees C-1, respectively and meanwhile, the Allan bias instability is slightly increased to 48.63 or 56.14 mu g, respectively.

Temperature Drift Compensation for Gap Sensor of High Speed Maglev Train

Some Research on Suspension Gap Sensor of High-Speed Maglev Train

Research on Levitation Gap Sensor for High Speed Maglev Train

Research on the Temperature Characteristic of Magnetic Sensor in the Magnetic Drift Compensation Fiber-Optic Gyroscope

Analyse and Design of the Coil Structure for the Gap Sensor of High Speed Maglev Train

Research on the Dynamic Characteristics of the Gap Sensor for Maglev Train

Temperature Drift Analysis and Compensation on Eddy Current Sensor

Temperature Compensation of Eddy Current Sensor

Study of Differential Magnet-moving Type Velocity Sensor

Characterization and Compensation of Thermal Bias Drift of a Stiffness-Tunable MEMS Accelerometer

Design and Optimization of Levitation Gap Sensors for High-speed Maglev trains

Temperature Drift Compensation for a High Pressure Eddy Current Displacement Sensor

Design on Fault Detection for Levitation Gap Sensor of High Speed Maglev Train

Temperature influence and compensation of cable tension sensor based on magneto-elastic effect

High Temperature Eddy Current Displacement Sensor Based on Temperature Drift Compensation

A Temperature Compensation Method for Magneto-Elastic Tension Sensor in Rod-Like Structure Tension Measurement

Electromagnetic field analysis and modeling of a relative position detection sensor for high speed maglev trains

Temperature Compensation Method for Tunnel Magnetoresistance Micro-Magnetic Sensors Through Reference Magnetic Field

The EMC Design of the Gap Sensor beneath Middle/Low-velocity Maglev Train

Design of Measurement Coils Structures for Levitation Gap Sensor to Decrease Electromagnetic Interferences

A Thermal Drift Compensation Method for Precision Sensors Considering Historical Temperature State