Abstract:An area-efficient and high precision digital front-end of audio delta-sigma digital-to-analog converters (DAC) was presented to meet the increasing demands of modern audio equipments on high-fidelity, portability and low power consumption. An improved common subexpression elimination (CSE) method, which increased the utilization rate of common subexpressions and decreased the hardware overhead and die area, was proposed to implement the finite impulse response (FIR) interpolator. Besides, a novel data weighted averaging (DWA) technique named as dual cycle shift DWA (DCS-DWA) was applied to a feedforward 3rd-order delta-sigma modulator with a 4-bit quantizer to eliminate the mismatch errors while no signal-dependent tones were introduced into the modulation loop, and as a result the signal-to-noise distortion ratio (SNDR) of the system was improved. The prototype of the digital front-end was implemented in a standard SMIC CMOS 0.18 μm 1P6M process, and the core area was 0.42 mm2. The measurement results showed that the peak SNDR of the digital front-end was 103.2 dB, and the dynamic range (DR) was 104.4 dB for the audio signal bandwidth of 20 kHz. In addition, the system power consumption was reduced to 0.12 mW in a supply voltage of 1.5 V. It has been proven that the main experimental results are consistent with the expectations well.

Chip Design and Implementation of Digital Audio Power Amplifier System

Design of the Digital Power Amplifier

Research and Implementation of A Low-power High-linearity Audio ΣΔ ADC In 65nm Process

Design of Analog Circuits in Multi-Bit Quantized Audio DAC

A High-Performance, Low-Power Σ Δ ADC for Digital Audio Applications

The Design and FPGA Verification of Interpolation Filter Used in △-∑ DAC

Design and Realization of A ΣΔPower DAC for Audio Application

Design of Digital Class-D Audio PWM Modulating Chip Based on Haft Band Filter

Architecture Design of Media SoC Based on Microprocessor Core

A Low-Power Inverter-Based ΣΔ Analog-to-digital Converter for Audio Applications

Design of a Fully-Digital Class-D Audio Power Amplifier Based on Open-Loop Configuration

SoC-oriented Design Methodology of Digital Audio Decoding System

Design of Intelligent Ultrasonic Power Source Based on FPGA

Design and Make of the Degital Power Instrument

Integrated Design of Three Signal Processor Based on FPGA

Design of Digital Audio Processing System Based on DSP and ARM

Design of an efficient digital front-end for audio delta-sigma digital-to-analog converter

A Low-Cost and Low-Power Digital Audio Processor

Low-power High-Linearity Sigma-Delta Modulator for Audio Applications

Design Of A Configurable System-On-Chip For Audio Application

Design and Implementation of Digital FM Exciter