Abstract:In this study, a kind of amphoteric chitosan-based flocculants (3-chloro-2-hydroxypropyl trimethyl ammonium chloride (CTA) modified carboxymethyl chitosan, denoted as CMC-CTA) have been prepared. The amphoteric flocculants showed notable improvement in solubility and salt-resistance in the whole pH range compared with its precursors, i.e., chitosan and cationic chitosan. The flocculation properties of CMC-CTA were systematically studied at both the laboratory and pilot scales. At laboratory scale, kaolin suspension was employed as synthetic water in the beaker experiment. The effects of pH, temperature, and original turbidity of untreated water on the dosage and flocculation performances were investigated, respectively. At pH below and above the isoelectric point of CMC-CTA, the optimal flocculation performances were obtained with a dosage of 0.03–0.20mg/L and 0.8–1.0mg/L, respectively. The flocculation mechanism was discussed in detail from the morphologies of polymeric flocculants and flocculation kinetics: The shape and charge of polymer chains in the solution greatly influenced the final flocculation performances; The flocculation kinetics agreed well with the particle collision model. Moreover, raw water from the Zhenjiang part of the Yangtze River in China was used for the further investigation of the flocculation properties at the pilot scale. The influences of dosage, sedimentation time, and mechanical mixing rate to the flocculation properties were studied by orthogonal testing. The optimal experimental condition was then obtained. Compared with the currently used flocculants in the Zhenjiang Water Factory, i.e., polyferric sulfate, which has an optimal dosage around 40mg/L, the value of CMC-CTA (1.1mg/L) decreased greatly. Above all, the flocculation experiments at the laboratory and pilot scales both indicate that the amphoteric chitosan-based flocculants have good flocculation performances in a wide pH range.

Flocculating Behaviors for Composite Flocculants of Crosslinked Quaternary Ammonium Salt of Chitosan-Polyaluminium Chloride

Flocculation Properties of Biodegradable Amphoteric Chitosan-Based Flocculants

Preparation of Strong Cationic Chitosan-graft-Polyacrylamide Flocculants and Their Flocculating Properties

Evaluation of a Novel Chitosan-Based Flocculant with High Flocculation Performance, Low Toxicity and Good Floc Properties

The preparation of gallic acid-grafted cationic chitosan as effective salt-tolerant flocculants

Dielectric barrier discharge plasma-modified chitosan flocculant and its flocculation performance

PROBING INTO THE MECHANISM OF COMPOSITE POLYALUMINUM SILICATE FLOCCULANTS WITH ION-EXCHANGE TECHNIQUE

The Flocculating Properties of Chitosan-Graft-Polyacrylamide Flocculants (Ii)-Test in Pilot Scale

Characterization and coagulation–flocculation performance of a composite coagulant: poly-ferric-aluminum-silicate-sulfate

Comb-Like Cationic Chitosan-Based Flocculant with Enhanced H-Bond Hydration for Effectively Treating Saline Colored Effluents with High Salinity

Cationic Content Effects of Biodegradable Amphoteric Chitosan-Based Flocculants on the Flocculation Properties

Physicochemical characterization and flocculation performance evaluation of PAC / PMAPTAC composite flocculant

Screening on Complexation and Applicatiom of Compound Microbial Flocculant and Chemical Flocculant

Efficient Flocculation of an Anionic Dye from Aqueous Solutions Using a Cellulose-Based Flocculant

APPLICATION OF COMPOSITE FLOCCULANT OF CHITOSAN IN TREATING CITY'S SEWAGE WATER

Synthesis and characterization of a novel cationic chitosan-based flocculant with a high water-solubility for pulp mill wastewater treatment.

Evaluation of the Flocculation Performance of Carboxymethyl Chitosan-Graft-polyacrylamide, a Novel Amphoteric Chemically Bonded Composite Flocculant

Flocculation performance evaluation and flocculation mechanism study of PAC/PMAPTAC composite flocculant in dyeing wastewater

Enhancement of Alga Removal Efficiency by Polyaluminum Chloride Using Clay As Coagulant Aid

Flocculation of Escherichia Coli Using a Quaternary Ammonium Salt Grafted Carboxymethyl Chitosan Flocculant

The application of chitosan quaternary ammonium salt to replace polymeric aluminum ferric chloride for sewage sludge dewatering