Abstract:A coupled thermo-metallo-mechanical model is proposed to analyse the temperature, stress and microstructure fields in multi-pass welding of P92 pipes. An axisymmetric model is adopted to increase the efficiency of the simulation. To preserve the temperature field from a three-dimensional (3D) analysis, a procedure is proposed to convert the 3D result into a two-dimensional (2D) form, which is compared to temperature fields created by other 2D heat transfer analyses. A metallurgical algorithm, which does not need the calibration with metallurgical experiments, is implemented in the finite element (FE) analysis to predict spatial distributions of product phases during multi-pass welding. Comparison between the predictions and the metallurgical graphs is made to verify the effectiveness of the metallurgical analysis after twenty thermal cycles. Hardness test is also employed to characterize the microstructure and to validate the metallurgical predictions. Five temperature fields, one created from the newly proposed approach and four from existent ones, are used as external loads to conduct the mechanical analysis. The volumetric change due to the phase transformation is considered as an extra volumetric strain, which is implemented by user subroutine. The stress distributions predicted using the five temperature fields are plotted together with the 3D stress result to examine the effectiveness of the developed procedure. The stress at the external surface of the pipe is measured by the X-ray diffraction technique, and is further compared to the stress predictions. The advantage of the model is demonstrated by comparing the computational time consumed in the mechanical analysis.

Study on thermal expansion calculation method for submarine pipe-in-pipe based on the shear lag theory

Numerical Analysis of Buried Pipe Characteristics

Fatigue Failure Analysis and Simulation Calculation of Submarine Suspended Pipelines

Numerical Simulation of Serial Sudden Expansions Pipe Flow

Modelling lateral pipe-soil interaction on soft clay using large displacement sequential limit analysis

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation

Analysis on Ultimate Bearing Capacity of Deepwater Submarine Pipe

Configuration of Submarine Pipeline for Deepwater S-lay Technique

Effective Design of Submarine Pipe-in-pipe Using Finite Element Analysis

Parametric study on the mechanical behavior of submarine pipeline for deepwater S-lay operation

Numerical Analysis for Pipeline Installation by S-Lay Method

Study on calculation methods of ground deformation induced by pipe jacking construction

Theoretical Study on Upheaval Buckling of Subsea Pipelines with Temperature-Dependent Thermal Properties at Different Carbon Contents

Thermal, metallurgical and mechanical analysis of circumferentially multi-pass welded P92 steel pipes

Buckling Response of Offshore Pipelines under Combined Tension and Bending

Numerical Analysis of Pipeline in J-Lay Problem

Numerical Study of Landslide Impact on Submarine Pipelines

Analytical Solution of Pipeline Upheaval Buckling Considering Bi-Linear Axial Pipe-Soil Interaction Model

Elastic Buckling of Cylindrical Pipe Linings with Variable Thickness Encased in Rigid Host Pipes

Simulation and experimental verification on fluid-structure interaction of T-shaped pressure pipeline

Submarine Pipeline Vibration Considering Fluid-Structure Interaction