Abstract:Porous zinc oxide (ZnO) nanosheet (NS) arrays constructed by connected nanocrystallites were built on weaved metal wire (WMW) via hydrothermal treatment followed by calcination, and used as photoanodes for flexible dye-sensitized solar cells (DSSCs). An overall light-to-electricity conversion efficiency (h) of 2.70% was achieved for the DSSC under 100 mW cm(-2) illumination, and this h was found to be much higher than that of the DSSC with ZnO nanowire (NW) as the photoanode (0.71%). The far superior performance of the DSSC with ZnO-NS is essentially attributed to: (i) the film consisting of nanosheets with interconnected nanocrystallites can allow relatively direct pathways for the transportation of electrons as the nanosheets have a regular structure with the sheets being oriented to the electrode; (ii) the nanocrystallites assembly and porous character of the nanosheets can provide a large surface area for dye adsorption, which is in favor of enhancing the light absorption and the light propagation; (iii) the nanopores embedded in the nanosheet can act as "branch lines" for more efficient electrolyte diffusion into the interstice of the densely packed nanosheets in the array. A further improvement in the efficiency of the DSSC with ZnO-NS was achieved through the atomic layer deposition (ALD) of an ultrathin titanium oxide (TiO2) layer onto the ZnO-NS layer. The larger charge transfer resistance along with the introduction of a TiO2 shell is thought to reduce the surface recombination and thus contribute to the increase in the open circuit voltage (V-oc) of the DSCs and higher conversion efficiency (3.09%).

Wire‐Shaped Flexible Dye‐sensitized Solar Cells

Transparent, Double-Sided, Ito-Free, Flexible Dye-Sensitized Solar Cells Based On Metal Wire/Zno Nanowire Arrays

Fibrous Flexible Solid-Type Dye-Sensitized Solar Cells Without Transparent Conducting Oxide

Single-wire dye-sensitized solar cells wrapped by carbon nanotube film electrodes.

A Solid-State Dye-Sensitized Solar Cell Based On A Novel Ionic Liquid Gel And Zno Nanoparticles On A Flexible Polymer Substrate

TCO‐Free, Flexible, and Bifacial Dye‐Sensitized Solar Cell Based on Low‐Cost Metal Wires (adv. Energy Mater. 1/2012)

TCO-free, flexible, and bifacial dye-sensitized solar cell based on low-cost metal wires

Conductive Mesh Based Flexible Dye-Sensitized Solar Cells

Highly-flexible, low-cost, all stainless steel mesh-based dye-sensitized solar cells

From wires to veins: wet-process fabrication of light-weight reticulation photoanodes for dye-sensitized solar cells.

Stable wire-shaped dye-sensitized solar cells based on eutectic melts

High efficiency flexible fiber-type dye-sensitized solar cells with multi-working electrodes

Porous ZnO Nanosheet Arrays Constructed on Weaved Metal Wire for Flexible Dye-Sensitized Solar Cells.

Quasi-solid-state, Coaxial, Fiber-Shaped Dye-Sensitized Solar Cells

Study on a stretchable, fiber-shaped, and TiO2 nanowire array-based dye-sensitized solar cell with electrochemical impedance spectroscopy method

Fiber-shaped all-solid state dye sensitized solar cell with remarkably enhanced performance via substrate surface engineering and TiO2 film modification

ZnO nanotube-based dye-sensitized solar cell and its application in self-powered devices.

Core‐Sheath Carbon Nanostructured Fibers for Efficient Wire‐Shaped Dye‐Sensitized Solar Cells

Flexible Fiber-Type Dye-Sensitized Solar Cells Based on Highly Ordered TiO2 Nanotube Arrays

Intertwined Aligned Carbon Nanotube Fiber Based Dye-Sensitized Solar Cells

Multiworking Electrode Flexible Fiber-Type Quantum Dot-Sensitized Solar Cells