Abstract:This work investigates the possibility of using LaMn0.7Fe0.3O3.15@mSiO(2) as oxygen carriers for chemical looping combustion (CLC). CLC is a new combustion technique with inherent separation of CO, from atmospheric N-2. LaMn0.7Fe0.3O3.15@mSiO(2) core shell materials were prepared by coating a layer of mesostructured silica around the agglomerated perovskite particles. The oxygen carriers were characterized using different methods, such as X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), N-2 sorption, hydrogen temperature-programmed reduction (H-2-TPR), and temperature-programmed desorption of oxygen (TPD-O-2). The reactivity and stability of the carrier materials were tested in a special reactor, allowing for short contact time between the fluidized carrier and the reactive gas [Chemical Reactor Engineering Centre (CREC) fluidized riser simulator]. Multiple reduction oxidation cycles were performed. TEM images of the carriers showed that a perfect mesoporous silica layer was formed around samples with 4, 32, and 55 nm in thickness. The oxygen carriers having a core shell structure showed higher reactivity and stability during 10 repeated redox cycles compared to the LaMn0.7Fe0.3O3.15 core. This could be due to a protective role of the silica shell against sintering of the particles during repeated cycles under CLC conditions. The agglomeration of the particles, which occurred at high temperatures during CLC cycles, is more controllable in the core shell-structured carriers, as confirmed by SEM images. XRD patterns confirmed that the crystal structure of all perovskites remained unchanged after multiple redox cycles. Methane conversion and partial conversion to CO, were observed to increase with the contact time between methane and the carrier. Indeed, more oxygen from the carrier surface, grain boundaries, and even from the bulk lattice was released to react with methane. Upon rising the contact time, less CO was formed, which is desirable for CLC application. Increasing the reaction temperature and methane partial pressure lead to enhanced conversions of CH4 under CLC conditions.

ADVANCES ON OXYGEN CARRIERS OF CHEMICAL-LOOPING COMBUSTION

New Insight into the Development of Oxygen Carrier Materials for Chemical Looping Systems

Performance and Kinetics of Iron-Based Oxygen Carriers Reduced by Carbon Monoxide for Chemical Looping Combustion

Numerical Investigation of Nickel–Copper Oxygen Carriers in Chemical-Looping Combustion Process with Zero Emission of CO and H2

Preparation of composite nickel–iron oxide as highly reactive oxygen carrier for chemical-looping combustion process

Theoretical Study of the Reactive Mechanisms of Li-Doped Ni-Based Oxygen Carrier during Chemical Looping Combustion

A High-Performance Oxygen Carrier with High Oxygen Transport Capacity and Redox Stability for Chemical Looping Combustion

Review on the Theoretical Understanding of Oxygen Carrier Development for Chemical-Looping Technologies

Development of Sinter-Resistant Core–Shell LaMnxFe1–xO3@mSiO2 Oxygen Carriers for Chemical Looping Combustion

Cerium Oxide Promoted Iron-based Oxygen Carrier for Chemical Looping Combustion

Enhanced resistance to carbon deposition in chemical-looping combustion of methane: Synergistic effect of different oxygen carriers via sequence filling

Chemical-Looping Combustion with Iron-Based Oxygen Carries

Unraveling the Structure–Reactivity Relationship of CuFe2O4 Oxygen Carriers for Chemical Looping Combustion: A DFT Study

Interaction Between Fe-based Oxygen Carriers and N-Heptane During Chemical Looping Combustion

Evaluation of Fe-Ni Composite Oxygen Carrier in Coal Chemical Looping Gasification

Computational design and experimental validation of transition-metal doped CuFe2O4 as oxygen carriers in chemical-looping combustion

Modification of Traditionally Impregnated Fe2O3/Al2O3 Oxygen Carriers by Ultrasonic Method and Their Performance in Chemical Looping Combustion

Developing Oxygen Carriers for Chemical Looping Biomass Processing: Challenges and Opportunities

Synergetic effects of mixed copper–iron oxides oxygen carriers in chemical looping combustion

Research Status and Progress of Chemical-Looping Combustion

Nickel Oxides Supported on Alumina as Oxygen Carriers for Chemical-Looping Combustion and Reforming of Methane