Abstract:The elastic stress and strain fields in a plate of finite thickness containing an elliptical hole are systematically investigated using the 3D finite element method. It is found that the stress and strain concentrations are different in the plate of finite thickness even if the plate is in an elastic state. The relation between the stress and the strain concentration factors depends on Poisson’s ratio, the hole’s geometric configuration and the plate thickness. The stress concentration factor is equal to the strain concentration factor only at the notch root of the plate surface. The stress (or strain) concentration factor at the notch root of the plate surface decreases rapidly with increasing thickness and becomes lower than the stress and strain concentration factors corresponding to the plane stress state or at the notch root of the mid plane. It is too low to reflect the overall stress concentration as the thickness increases or as the b/a ratio decreases. The maximum stress concentration factor occurs on the mid plane only when the plate is thinner than the transition thickness of the stress concentration factor. When the plate is thicker than the transition thickness of the stress concentration factor, the distance between the location of the maximum stress concentration factor and plate surface tends to be constant with increasing thickness for the plate with a given b/a ratio. The differences between the maximum value and the surface value of the stress and strain concentration factors increase rapidly and tend to their respective constant values with increasing plate thickness. The smaller the b/a ratio, the larger these differences. The difference of the stress concentration factor is larger than that of the strain concentration factor in the same plate.

Three-dimensional stress concentration and its influence on the fatigue strength at an elliptic hole

Three-Dimensional Elastic Stress Fields of Finite Thickness Plates with Elliptical Hole

FE Analysis of Stress Concentrations in Composite Plates with Multiple Holes for Zigzag Multi-Fastened Joints

Three-Dimensional Elastic Stress Fields in Finite Thickness Plate with a Hole

STIFFENER STIFFNESS AND ELASTIC BUCKLING STRESS OF STEEL PLATE SHEAR WALL

The Stress and Strain Concentrations of an Elliptical Hole in an Elastic Plate of Finite Thickness Subjected to Tensile Stress

The Stress Concentration in Finite-Size Plates Containing Elliptical Holes with a Direct Solution of Complex Series

The Coupled Effects of Thickness and Distance Between Holes on Stress and Strain Concentrations of Uniaxially Loaded Tensile Plates

The size effect on the concentration of stress and strain in finite thickness elastic plate containing a circular hole

The concentration of stress and strain in finite thickness elastic plate containing a circular hole

Numerical Analysis and Punching Shear Fracture Based Design of Longitudinal Plate to Concrete-Filled CHS Connections

The Stress and Strain Concentrations Associated with Two Interacting Holes in A Finite Thickness Elastic Plate Subjected to Tensile Stress

Component Structural Equivalent Research Based on Different Failure Strength Criterions and the Theory of Critical Distance

Three Dimensional FE Analysis of the Plastic Zone Size Near the Crack Tip

Research on the stress intensity factor calculation of multi-elliptical hole-edge crack

Three-dimensional weight function analyses and stress intensity factors for two eccentric and asymmetric surface cracks and surface-corner cracks at a circular hole

Finite Element Analysis on Stress Concentration at Weld Toe of Butt-Welded Joints

Prediction of Stress Concentration Factor Distribution for Multi-Planar Tubular DT-joints under Axial Loads

3D Elasticity Solutions for Stress Field Analysis of FGM Circular Plates Subject to Concentrated Edge Forces and Couples

Stress and strain concentrations in finite-thickness rings under diametrically opposite external loads

Weight function method and stress intensity factor for two unsymmetric through-thickness and quarter-elliptical corner cracks at circular hole