Abstract:Laccase-mediator-oxidized lignin offers replacement for conventional chemical binders to produce fiberboards. Compared to the previously reported laccase-mediator system (LMS), a lignin-laccase-mediator-system (LLMS) has an advantage in that it requires much shorter fiber-enzyme incubation time due to significantly increased redox reactions. However, the cost of regularly applying laccase on an industrial scale is currently too high. We have employed CcLcc5 from cultures of the basidiomycete Coprinopsis cinerea as a novel basi-laccase (a CAZy subfamily AA1_1 laccase) in medium-density fiberboard (MDF) production, in comparison to the commercial formulation Novozym 51003 with recombinantly produced asco-laccase MtL (a CAZy subfamily AA1_3 laccase-like multicopper oxidase from the ascomycete Myceliophthora thermophila). With the best-performing natural mediator 2,6-dimethoxyphenol (DMP), unpurified CcLcc5 was almost as good as formulated Novozym 51003 in increasing the molecular weight (MW) of the technical lignins tested, the hydrophilic high-MW Ca-lignosulfonate and the hydrophobic low-MW kraft lignin (Indulin AT). Oxygen consumption rates of the two distantly related, poorly conserved enzymes (31% sequence identity) with different mediators and lignosulfonate were also comparable, but Indulin AT significantly reduced the oxidative activity of Novozym 51003 unlike CcLcc5, regardless of the mediator used, either DMP or guaiacol. Oxygen uptake by both laccases was much faster with both technical lignins with DMP than with guaiacol. In case of lignosulfonate and DMP, 20-30 min of incubation was sufficient for full oxygen consumption, which fits in well in time with the usual binder application steps in industrial MDF production processes. LLMS-bonded MDF was thus produced on a pilot-plant scale with either crude CcLcc5 or Novozym 51003 at reduced enzyme levels of 5 kU/kg absolutely dry wood fiber with lignosulfonate and mediator DMP. Boards produced with CcLcc5 were comparably good as those made with Novozym 51003. Boards reached nearly standard specifications in internal bond strength (IB) and modulus of rupture (MOR), while thickness swelling (TS) was less good based on the hydrophilic character of lignosulfonate. LLMS-bonded MDF with Indulin AT and DMP performed better in TS but showed reduced IB and MOR values.

Modification of unbleached masson pine ground wood pulp with laccase/mediator system

The Effects of NaOH-Urea Aqueous Solution on the Strength and Softness Properties of Bamboo Ligno-cellulosic Fibers

A study on modification of chemi-mechanical pulping property of wheat straw by pretreatment with ZnCl2aqueous solution

ZnCl2 Pretreatment of Bamboo Chips to Produce Chemi-Thermomechanical Pulp: Saving Refining Energy and Improving Pulp Properties

Advances in Research and Application of Laccase Mediator System

Modification on the Chemi-mechanical Pulping Property of Rice Straw with Alkali-urea System

Effect of enzyme lignin oxidation by laccase on the enzymatic-mechanical production process of lignocellulose nanofibrils from mechanical pulp

Effect of Pretreatments on the Enzymatic Hydrolysis of High-Yield Bamboo Chemo-Mechanical Pulp by Changing the Surface Lignin Content

Combination of steam explosion and laccase-mediator treatments prior to Eucalyptus globulus kraft pulping

Effect of Partially Substituting MgO for NaOH on Bleaching of Pine (pinus Massoniana) Thermomechanical Pulp

Pozone Technology to Bleach Pulp

Enhancing Enzyme-Mediated Cellulose Hydrolysis by Incorporating Acid Groups Onto the Lignin During Biomass Pretreatment

Effluent Characteristics and Pulp Properties Changes with the Partially Substituting MgO for NaOH in the High-Consistency Retention Stage of Triploid Poplar P-RC APMP

Modification of a Marine Pine Kraft Lignin Sample by Enzymatic Treatment with a Pycnoporus cinnabarinus Laccase

Enzymatic Oxidation of Ca-Lignosulfonate and Kraft Lignin in Different Lignin-Laccase-Mediator-Systems and MDF Production

Modification of Cellulase to Different Bleached Softwood Pulp

On bleaching bamboo pulp preparation in Milox solvent method

Study On The Mixture Of Bleached Kraft Pulp With P-Rc Apmp Produced By Partially Substituting Mg(Oh)(2) For Naoh

Pretreatment to Improve Adsorption and Effectiveness of Wet End Chemicals for A Bleached Chemithermomechanical Pulp

Achieving Refining Energy Savings and Pulp Properties for Poplar Chemithermomechanical Pulp Improvement Through Optimized Autohydrolysis Pretreatment

Research on Milox Pulping of Non-Wood Raw Material