Abstract:This paper investigates the forward and inverse kinematics in screw coordinates for a planar slider-crank linkage. According to the definition of a screw, both the angular velocity of a rigid body and the linear velocity of a point on it are expressed in screw components. Through numerical integration on the velocity solution, we get the displacement. Through numerical differential interpolation of velocity, we gain the acceleration of any joint. Traditionally, position and angular parameters are usually the only variables for establishing the displacement equations of a mechanism. For a series mechanism, the forward kinematics can be expressed explicitly in the variable of position parameters while the inverse kinematics will have to resort to numerical algorithms because of the multiplicity of solution. For a parallel mechanism, the inverse kinematics can be expressed explicitly in the variable of position parameters of the end effector while the forward kinematics will have to resort to numerical algorithms because of the nonlinearity of system. Therefore this will surely lead to second order numerical differential interpolation for the calculation of accelerations. The most prominent merit of this kinematic algorithm is that we only need the first order numerical differential interpolation for computing the acceleration. To calculate the displacement, we also only need the first order numerical integral of the velocity. This benefit stems from the screw the coordinates of which are velocity components. The example of planar four-bar and five-bar slider-crank linkages validate this algorithm. It is especially suited to developing numerical algorithms for forward and inverse velocity, displacement and acceleration of a linkage.

The Design of the Analytical Method on Slider-crank Mechanism in Given the Two Related Displacements

Design of the Analytical Method for Given Two Related Angular Displacements of Crank-rocker Mechanism

Simplified Calculation of Second Order Displacement for Frames with Semi-rigid Connections

Construction Process Internal Forces and Displacements Superimposed Analysis Method and Application

Analysis on the Displacement Performances of Parallel Four-Bar Flexure Hinge Mechanism

Flexibility Index And Design Of Chemical Systems By Cylindrical Algebraic Decomposition

Design of the crank–rocker mechanism for various design cases based on the closed-form solution

Design And Analysis Of Two Dimensional X-Y Micropositioning Stage

Kinematics of a Planar Slider-Crank Linkage in Screw Form

Dynamic analysis of the double crank mechanism with a 3D translational clearance joint employing a variable stiffness contact force model

Design And Kinematic Analysis Of A 2-Dof Spatial Parallel Mechanism With Flexible Orientation Capability

Design and DOF Analysis of a Novel Compliant Parallel Mechanism for Large Load

Design Of Single-Dof Micro-Displacement Flexure Hinge Mechanism Actuated By Pzt

A comprehensive method for the contact detection of a translational clearance joint and dynamic response after its application in a crank-slider mechanism

Research on kinematic characteristics of spatial crank rocker mechanism based on MATLAB

Optimal Design of a Novel 4-Degree-of-freedom Parallel Mechanism with Flexible Orientation Capability

Design and analysis of a hexagon rolling mechanism with a center-arranged actuator

Mechanism Design and Mechanical Analysis of Reconfigurable Wheel-track Wheel Based on Offset Guide Rod Mechanisms

Design of a lightweight red date pitting machine base on spatial slider-crank mechanism

A New Method to Study the Degree of Freedom of Spatial Parallel Mechanisms

Analysis and Application of a 2-DOF Planar Parallel Mechanism