Abstract:A high-voltage electrolyte can match high-voltage positive electrode material to fully exert its capacity. In this research, a sulfolane plasticized polymer electrolyte was prepared by in situ photocuring. First, the effect of the sulfolane content on the ionic conductivity of the gel polymer electrolyte was investigated. Results showed that the ionic conductivity variation trend was in good agreement with the exponential function model for curve fitting. Second, the activation energy was calculated from the results of the variable temperature conductivity tests. The activation energy was inversely proportional to the sulfolane content. For the sulfolane content of 80 wt. % in gel polymer electrolyte (GPE)-80 (19.5 kJ/mol), the activation energy was close to conventional liquid electrolyte (9.5 kJ/mol), and the conductivity and electrochemical window were 0.64 mS/cm and 5.86 V, respectively. The battery cycle performance test showed that the initial specific discharge capacities of GPE-80 and liquid electrolyte were 176.8 and 148.3 mAh/g, respectively. After 80 cycles, the discharge capacities of GPE-80 and liquid electrolyte were 115.8 and 41.1 mAh/g, and the capacity retention rates were 65.5% and 27.7%, respectively; indicating that GPE-80 has a better specific discharge capacity and cycling performance than the liquid electrolyte. SEM images indicated that GPE-80 can suppress the growth of lithium dendrites. The EDS test showed that GPE-80 can inhibit the dissolution of metal ions in the cathode material.

Effects of covalently bonded siloxane on the electrochemical and physical behaviour of GEL-VRLA battery

Effects of PDMS with Polyether Side Chains on the Fluoropolymer Based Gel Lithium Electrolytes

Investigation and Application of Polysiloxane-Based Gel Electrolyte in Valve-Regulated Lead-Acid Battery

Preparation Of Poly (Dimethylsiloxane) Graft (Poly(Propylene Oxide)-Block-Poly (Ethylene Oxide) Modified Pvdf Separator And Its Use In Lithium Ion Batteries

Highly conductive, anti-freezing, and adhesive hydrogels containing pores constructed by cation-dipole interactions

Influence of Different Silica Gelling Agents on the Performance of Aqueous Gel Electrolytes

The effect of fumed silica in the polymer gel electrolyte on the cycle efficiency of lithium deposition/striping process

Application of A Novel Gelled-Electrolyte in Valve-Regulated Lead-Acid Batteries with Tubular Positive Plates

The effect of fumed silica on the interfacial stability in the polymer gel electrolyte

Gel electrolyte with flame retardant polymer stabilizing lithium metal towards lithium-sulfur battery

Supramolecular polymer cross-linking gel electrolyte for highly stable quasi-solid-state lithium metal batteries

High-Voltage Sulfolane Plasticized Uv-Curable Gel Polymer Electrolyte

Organosilicon Functionalized Electrolytes for Lithium-Ion Batteries

Steric molecular combing effect enables Self-Healing binder for silicon anodes in Lithium-Ion batteries

The Role of the Molecular Encapsulation Effect in Stabilizing Hydrogen‐Bond‐Rich Gel‐State Lithium Metal Batteries

In situ Gel Electrolytes for the Interfacial Regulation of Lithium Metal Batteries

A porous poly(vinylidene fluoride) gel electrolyte for lithium ion batteries prepared by using salicylic acid as a foaming agent

Advanced Silicon Anode Enabled by Simple Pouring of Bifunctional Gel Polymer

Cross-linking copolymers of acrylates’ gel electrolytes with high conductivity for lithium-ion batteries

High-performance gel electrolyte for enhanced interface compatibility and lithium metal stability in high-voltage lithium battery

Molecular-level insights into the reactivity of siloxane-based electrolytes at a lithium-metal anode.