Abstract:We propose a passive equalizer design on high density interconnects to improve the serial chip-to-chip communication channel performance. This new technique is a novel implementation and reinvention of the quarter-wave impedance transformer design originally adopted in the RF/microwave systems. By using narrow traces at early escaping routing and series of fat section impedance compensators at periodic λ/4 distances, this technique relies heavily on the signal wavelength of operating frequency and is suitable for specific high speed systems as required by PCIe, QPI, KTI, and SerDes for 25GHz and beyond. This technology utilizes the frequency-selective structures and has been tested on both microstrip and stripline routing of a flip-chip package design. Using proposed design optimization process for passive equalizer, we can maximize eye-opening and minimize inter-symbol interference in order to reduce data-dependent jitter. For 25Gbps differential high speed signaling, it shows over 3.1 dB improvement on differential return loss and over 0.7 dB improvement on differential insertion loss, which translate to over 17% increase on eye height and over 7% decrease of jitter for end-to-end whole channel simulation on server blade.

Design of codec for the physical layer of 100G Ethernet

Design and Implementation of Coding Algorithm in Physical Coding Sublayer of Gigabit Ethernet

100-Gbps Hybrid Optical Fiber-Wireless Transmission

Design of the Physical Coding Sublayer Based on the Ethernet 10Gbase-R Protocol

Design of an In-line Packet Transceiver for 10 Gb/s Ethernet

10Ghz Frame Clock Extraction Technology for 4×10gbit/s OTDM System

A Single-Routing Layered LDPC Decoder for 10Gbase-T Ethernet in 130nm CMOS

Beyond 100 Gb/s Optical OFDM Transmitted in Optical Long-Haul System

High-Throughput Zipper Encoder for 800G Optical Communication System.

Design Analysis of 10Gbps Forwarding Engine with FPGA

Design of the SPI Interface of 10-Gigabit Ethernet with FPGA

A 25gb/s Adaptive Decision Feedback Equalizer for 100G Ethernet in 65NM CMOS Technology

A Single Chip Solution of Dual-Gigabit Ethernet over 2.5G SDH/SONET

A Coarse-Grained Reconfigurable Array Based Ethernet Reliable Transmission Design

Design and performance evaluation of 100 Gb/s LDPC-coded polarization division multiplexing CO-OFDM physical layer

Design of High-speed Data Transmission System based on PCI Express interface

Passive Equalizer Design on High Density Interconnects for 25gbps High Speed Io and Beyond

A 10gb/s Compact Low-Power Serial I/O with DFE-IIR Equalization in 65nm CMOS

Design of Automatic Repeat Request on Gigabit Ethernet Switch-based Gbps Radio Platform

Joint Trellis Decoder and Equalizer in 0.13µm CMOS Process for 1000Base-T Gigabit Ethernet Transceiver

Analysis and Design of Application Based on 10G Ethernet's Technology